DISHES ARE NOT CLEANING PROPERLY
Whirlpool Corporation Dishwasher Pump and Motor Assembly; complete circulation, drain pump, and sump assembly W11416362, Fixes Dishes are not cleaning properly
Genuine Whirlpool OEM dishwasher circulation pump and motor assembly, including the circulation pump, drain pump, and sump assembly. Documented for use in KitchenAid and Whirlpool dishwashers.
Part W11416362Replaces W11345228Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11416362
ReplacesW11345228
ManufacturerWhirlpool Corporation
Appliance TypeDishwasher
Part TypePump and Motor Assembly; complete circulation, drain pump, and sump assembly
✅ Cross Reference Information
Current Part NumberW11416362
ReplacesW11345228
Common Symptoms
- Little or no water spraying from the spray arms / poor wash-water circulation.
- Water remaining in the tub after the drain portion of a cycle may warrant checking this assembly’s drain-pump function, along with the drain path.
Check Before Replacing
- Disconnect power before any inspection. Check and clean the dishwasher filter and inspect spray-arm holes for debris that could restrict water flow.
- During a cycle, confirm the dishwasher fills, then listen for wash-water circulation; lack of spray-arm action can also result from restrictions or an electrical/control issue.
- If water remains after draining, inspect the drain hose for kinks or obstructions and verify the drain pump is operating before attributing the symptom to the complete assembly.
- Use the dishwasher’s model-specific service information/diagnostics to check for stored fault indications before replacing the assembly.
Pro Tip
Do not diagnose the assembly from poor cleaning alone: first rule out blocked filters or spray arms and a restricted drain hose, since those can produce similar symptoms.
Part Details
Part NumberW11416362
Part TypePump and Motor Assembly; complete circulation, drain pump, and sump assembly
ManufacturerWhirlpool Corporation
Appliance TypeDishwasher
Primary FunctionCirculates wash water through the dishwasher spray arms; this complete assembly also includes the drain pump and sump.
Installation Notes
- Disconnect electrical power and shut off the dishwasher water supply before installation.
- Confirm the part against the appliance model and parts diagram before disassembly.
- After installation, restore utilities and check operation and connection areas for leaks.
Verified Compatible Models
KDFM404KPS2, KDFM404KPS3, KDPM604KPS0, KDPM604KPS1, KDPM704KPS0, KDPM704KPS2, KDPS624SBE0, KDTM404KPS0, KDTM604KBS2, KDTM604KPS1, KDTM604KPS3, KDTM704KPS0, KDTM804KPS1, KDTM804KPS2, WDTS8024SV0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
