W11416371 Dishwasher Panel
W11416371 Dishwasher Panel

KitchenAid Dishwasher Control Panel W11416371 — Fixes Unresponsive Controls and Display Failures

Sale price
$166
Regular price
$216
You save
$50 (23%)

Frequently Bought Together

Confirm This Fits Your Model
Not sure where to find your model number? See guide →

What Customers Say About XPart Supply

4.82 ★ (250)
Verified
Clearance - Loss Leader Program
OEM REPLACEMENT PART — CLEARANCE PRICE

KitchenAid Dishwasher Control Panel W11416371 — Fixes Unresponsive Controls and Display Failures

Part# W11416371 Replaces W11233283 Fits KitchenAid KDTE / KDTM Series

KitchenAid Dishwasher Buttons Not Responding or Display Blank? Control Panel W11416371 – Fix KDTE / KDTM Control Failure Fast

If your KitchenAid KDTE or KDTM series dishwasher has unresponsive buttons, a blank or flickering display, or won't start a cycle despite powering on, a failed control panel is the most common cause. In most KitchenAid dishwashers, the control panel is the user interface that communicates cycle selections, temperature, and option settings to the main control board. When it fails — due to moisture intrusion, button wear, or electrical damage — the dishwasher becomes unresponsive or displays incorrect cycle information, making it impossible to start or adjust a wash cycle. ⚡ Common failure point on KitchenAid KDTE104, KDTE204, and KDTM404 series dishwashers. Part W11416371 is the genuine OEM replacement control panel that restores full button response and display function on KDTE and KDTM series dishwashers.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

  • ✔ QUALIFIER 1 — dishwasher powers on (interior light works, door latch functions normally)
  • ✔ QUALIFIER 2 — water supply and drain confirmed OK
  • ✔ QUALIFIER 3 — main control board has been ruled out as the failure point
  • ✔ ONLY problem is buttons not responding, display blank/flickering, or cycle won't start from the panel

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

  • Dishwasher buttons are unresponsive or require excessive pressure to register
  • Display is blank, flickering, or showing incorrect cycle information
  • Dishwasher won't start a cycle even though it powers on normally
  • Specific buttons work intermittently or have stopped working entirely

✔ If these symptoms match, the control panel is the most likely failed component in the system.

✔ In most cases, replacing the control panel restores full button response and display function immediately.

📦 Part Details

  • Part Number: W11416371
  • Type: Dishwasher Control Panel — User Interface Panel with cycle selector buttons and display
  • Replaces: W11233283
  • Brands: KitchenAid
  • Fits: KDTE104, KDTE204, and KDTM404 series KitchenAid dishwashers
⚠️ Recommended While Repairing:
Before replacing the control panel, confirm the main control board is functioning correctly — a failed board can produce identical symptoms (unresponsive buttons, blank display, no cycle start). If the panel replacement doesn't resolve the issue, the main control board is the next component to inspect. Replacing both in one visit eliminates the two most common failure points in the control system.

⚙️ Installation

Skill Level: MODERATE — 30–45 minutes. Disconnect power at the breaker before starting. Open the dishwasher door and remove the inner door panel screws along the perimeter to separate the inner and outer door panels. Disconnect the ribbon cable and wiring harness from the old control panel, transfer any mounting clips to the new W11416371, reconnect all connections, and reassemble the door panels. Run a test cycle to confirm full button and display response.

✓ Compatible Models

Confirmed compatible with KDTE104KPS0, KDTE204KBL0, KDTE204KBS0, KDTE204KPS0, KDTE204KWH0, KDTM404KBS0, KDTM404KPS0 plus additional KitchenAid KDTE and KDTM series models. Contact us to verify your model number before ordering.

💡 Pro Tip

Rule Out the Control Board Before Ordering:
Control panel and main control board failures on KitchenAid KDTE/KDTM dishwashers present nearly identical symptoms — unresponsive buttons, blank display, no cycle start. Before ordering, try a hard reset: disconnect power for 5 minutes, then restore. If the panel responds after a reset but fails again quickly, the control board is likely sending bad signals to the panel. Confirm which component is failing before ordering to avoid a second service call.

✓ Model-Specific Repair Pages

Frigidaire DISHWASHER Oven Parts & Repair Guide Whirlpool KDTE104KPS0 Dishwasher Parts & Repair Guide Whirlpool KDTE204KWH0 Dishwasher Parts & Repair Guide Whirlpool KDTE204KPS0 Dishwasher Parts & Repair Guide Whirlpool KDTE204KBS0 Dishwasher Parts & Repair Guide Whirlpool KDTE204KBL0 Dishwasher Parts & Repair Guide Whirlpool KDTM404KPS0 Dishwasher Parts & Repair Guide Whirlpool KDTM404KBS0 Dishwasher Parts & Repair Guide

✅Compatibility & Cross Reference

Item #6 in diagram.



Part number W11416371 replaces W11233283

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps