Dryer Door Won't Latch? Door Strike W11429589 – Fix a Broken Latch Fast
A dryer that won't stay closed won't run — and a worn door strike is the most common reason. In most Whirlpool, Maytag, and Amana dryers, the door strike is the plastic catch that engages the door latch assembly to hold the door shut during operation. When it breaks or wears down, the door won't click closed, the dryer won't start, or the door pops open mid-cycle. ⚡ Common failure point in Whirlpool-built dryers. Part W11429589 is the genuine OEM replacement that restores a secure door latch and gets your dryer running again.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your dryer powers on and all other functions work normally
- ✔ The drum, motor, and heating element are functioning correctly
- ✔ The door latch assembly (catch side) is intact and not broken
- ✔ ONLY problem is the door won't click shut, won't stay closed, or the dryer won't start due to an open-door fault
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Dryer door won't click or latch shut
- Door pops open during a cycle
- Dryer won't start — door switch not engaging due to poor latch
- Visible crack, chip, or wear on the plastic door strike tab
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this door strike restores a secure latch and normal dryer operation immediately.
📦 Part Details
- Part Number: W11429589
- Type: Dryer Door Strike (latch tab / catch)
- Replaces: W10714516, W10861225
- Brands: Whirlpool, Maytag, Amana, Kenmore
Inspect the door latch assembly (the catch that the strike clips into) at the same time. If the latch is cracked or the spring tension is weak, replacing only the strike may not fully resolve the issue. Replacing both together ensures a solid, long-lasting repair and saves a second service call.
⚙️ Installation
Skill Level: Easy — 5 to 10 minutes. Disconnect power before servicing. The door strike is mounted on the dryer door panel and typically secured by one or two screws or press-fit clips. Remove the old strike, align the new W11429589 in the same position, and secure. Close the door to confirm the latch engages cleanly before restoring power.
✓ Compatible Models
Confirmed compatible with WED5000DW1, WED5000DW2, WED49STBW1, MED5000BW1, NED5800DSW1, WED5100HW0, WED5100HW1, WED4950HW0, WED4950HW1, MED5500FW0, MED5500FW1, NED5800DSW2 plus additional Whirlpool, Maytag, and Amana dryer models. Contact us to verify your model number before ordering.
💡 Pro Tip
If your dryer won't start and the door appears to close but the strike looks intact, press the door switch plunger manually with the door open — if the dryer starts, the strike is definitely not making contact and this is your fix. If the dryer still won't start with the switch manually depressed, the door switch itself may also need replacement (check the door switch for your model separately).
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
