W11551763 Dryer Certified Refurbished Door Switch

Whirlpool Dryer Door Switch, Snap-in W11551763, Replaces W11307535

XPart Number XP10010445
Sale price
$14.98
Regular price
$24.26
In stock and ready for shipping

Frequently Bought Together

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →
DRYER WILL NOT START WITH THE DOOR CLOSED

Whirlpool Dryer Door Switch, Snap-in W11551763, Fixes Dryer will not start with the door closed

Genuine Whirlpool snap-in door switch assembly. For supported dryer models, it prevents operation when the door is open. Established retailer evidence also lists this same OEM part for select microwave models.

Part W11551763Replaces W11307535Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part NumberW11551763
ReplacesW11307535
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeDoor Switch, Snap-in

✅ Cross Reference Information

Current Part NumberW11551763
ReplacesW11307535

Common Symptoms

  • Dryer does not start even though the door appears fully closed.
  • Dryer stops unexpectedly when door movement interrupts the switch circuit.
  • Intermittent starting when the door is closed, potentially associated with switch actuation, wiring, or door alignment.

Check Before Replacing

  • Confirm the door closes fully and engages the door strike without unusual looseness or obstruction.
  • With power disconnected, visually inspect the switch, connector, and nearby wiring for damage, looseness, lint, or displaced components.
  • Check that the switch actuator moves freely when operated by the closed door; do not bypass the safety switch.
  • If the model's technical documentation specifies a door-switch diagnostic or continuity test, follow that model-specific procedure with power disconnected unless the documentation directs otherwise.

Pro Tip

Before replacing the switch, verify that the door strike and switch actuator align correctly; a misaligned or obstructed door can mimic a switch problem.

Part Details

Part NumberW11551763
Part TypeDoor Switch, Snap-in
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionSenses whether the dryer door is closed and prevents dryer operation with the door open; opening the door during a cycle should interrupt operation.

Installation Notes

  • Disconnect electrical power before servicing or installing the switch.
  • Follow the appliance model's service instructions for access to the switch.
  • Transfer or reconnect wiring exactly as it was on the original component and ensure the replacement is fully seated in its snap-in mount.
  • After reassembly, verify that the dryer starts only with the door closed and stops when the door is opened.

Verified Compatible Models

8TMGD6630HW1, 8TWED5620HW1, 8TWGD5620HW1, 8TWGD5620HW2, 8TWGD6622HW1, 8TWGD6622HW2, 8TWGD8620HW1, 8TWGD8620HW2, BSE17ASANA0, MED6230HC0, MED6230HC2, MED6230HW0, MED6230HW2, MED6230HW3, MED6230RHW0, MED6230RHW2, MED6630MBK0, MED7020RF0, MED7020RU0, MED7020RW0, MED7230HC0, MED7230HC1, MED7230HC2, MED7230HW1, MED7230HW3, MED8630HW2, MGD5630HC2, MGD5630HC4, MGD5630HW2, MGD5630HW4, MGD6230HC0, MGD6230HC3, MGD6230HW3, MGD6230RHW1, MGD6230RHW3, MGD6630HC2, MGD6630HC4, MGD6630HW2, MGD6630HW4, MGD6630MBK0, MGD7230HC1, MGD7230HC3, MGD7230HW1, MGD7230HW3, MGD8630HC2, MGD8630HC4, MGD8630HW2, NED5800HW1, NGD5800HW1, NGD5800HW2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions