Whirlpool Refrigerator Ice Maker Assembly W11557000, Replaces W11414320, W11391033, W11026493, W11099789

Genuine Whirlpool OEM refrigerator ice maker assembly. The part is listed for Whirlpool refrigerators and related Whirlpool-manufactured brands, including KitchenAid and Whirlpool.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Ice cubes do not eject from the mold.
• Ice maker stops cycling or does not call for water.
• Irregular or leaking ice production from a cracked assembly.
• Frozen water or an overfilled ice mold.

Check Before Replacing

• Confirm the ice maker is switched on and that its shutoff arm or control is in the operating position.
• Verify the refrigerator has an active water supply and that the dispenser supplies water normally, if equipped.
• Inspect the ice-maker fill tube and mold area for visible ice blockage or leakage without probing or prying the assembly.
• Check that the freezer or ice-maker compartment is cold enough for ice production; do not diagnose the assembly solely from a no-ice symptom.
• If the refrigerator provides an ice-maker service diagnostic cycle, observe whether the ejector motor operates and whether water enters near the end of the cycle.
• After installation, observe one complete cycle for ejector movement and water fill; normal ice production may take approximately 24 hours.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM ice maker assembly.
• Designed to automatically freeze and harvest ice cubes.
• Assembly-level replacement for the listed Whirlpool refrigerator applications.
• Current Whirlpool OEM number W11557000; Whirlpool identifies W11414320, W11391033, W11026493, and W11099789 as replaced numbers.

Installation Notes

• Disconnect electrical power before servicing the refrigerator.
• Remove the ice bucket or pan as applicable before accessing the assembly.
• Release the assembly using its existing retaining tabs or mounting arrangement, then disconnect the wiring connector without pulling on the wires.
• If the installation requires handling the fill tube or heater, follow the model-specific service information and avoid damaging the water line.
• After installation, restore power, confirm the ice maker is enabled, and verify ejector movement and water fill during a diagnostic or normal cycle.

Verified Compatible Models

KRFC604FSS01, KRFC604FSS02, KRFC604FSS03, WRF954CIHB00, WRF954CIHB01, WRF954CIHB02, WRF954CIHM00, WRF954CIHV00, WRF954CIHV01, WRF954CIHV04, WRF954CIHW00, WRF954CIHW01, WRF954CIHW02, WRF954CIHZ00, WRF954CIHZ01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.