Whirlpool Microwave Outer door glass assembly / door assembly W11602618, Replaces W11300377

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible crack, chip, or breakage in the outer door glass
• Door appears bent, loose, or misaligned
• Door does not close properly or sits unevenly against the oven face
• Microwave will not start because the door is not registering as fully closed

Check Before Replacing

• With the appliance unplugged, visually inspect the outer glass for cracks, chips, looseness, or separation from the door assembly.
• Check that the door closes fully, sits parallel to the oven front, and has no obvious play or obstruction.
• Inspect the visible hinges, latches, and sealing surfaces for bending, looseness, or damage; do not attempt to adjust internal door components.
• Do not operate the microwave if the door glass is broken or the door, hinges, latches, or sealing surfaces are damaged. A qualified technician should perform a microwave-leakage test after door repair or replacement.

Pro Tip

Part Details

Installation Notes

• Treat the part as a complete microwave door assembly and follow the appliance model’s service documentation.
• Disconnect power before any inspection or replacement work.
• Do not lift, carry, or support the appliance by the door or handle.
• Door alignment and latch/interlock condition are safety-critical; use a qualified appliance technician for installation when the door assembly or shielding components are disturbed.
• A qualified technician should perform the required microwave-leakage and door-operation checks before returning the appliance to service.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.