LONGER-THAN-USUAL DRYING TIME
Whirlpool Dryer lint screen W11603116, Fixes Longer-than-usual drying time
Genuine Whirlpool dryer lint screen/filter assembly that captures lint and debris from the dryer exhaust airflow.
Part W11603116Replaces W11522757, W11538108Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11603116
ReplacesW11522757, W11538108
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeDryer lint screen
✅ Cross Reference Information
Current Part NumberW11603116
ReplacesW11522757, W11538108
Common Symptoms
- Clothes remain damp or take longer to dry when the screen is clogged or coated with residue.
- Lint may accumulate around the dryer door or on clothing if airflow is restricted.
- The dryer may overheat or stop before the load is completely dry if the screen is blocked or missing.
- Visible damage, looseness, or poor seating of the screen can allow lint to bypass the filter.
Check Before Replacing
- Remove the lint screen and visually inspect it for lint buildup, detergent or fabric-softener residue, tears, warping, or other damage.
- With the dryer off, confirm that the screen fits securely and is not loose or missing from its housing.
- Clean the screen according to the dryer owner's manual; if residue remains, wash it with hot water and a soft or nylon brush, then dry it completely before reinstalling.
- After reinstalling the screen, verify that it is fully seated. Do not operate the dryer with the screen loose, damaged, blocked, or missing.
- If drying remains poor after the screen is clean and correctly seated, inspect the dryer vent and airflow separately rather than assuming the screen is the cause.
Pro Tip
A screen can look clean while its mesh is coated with detergent or fabric-softener residue; periodically wash it with hot water and a nylon brush, then dry it thoroughly before reinstalling.
Part Details
Part NumberW11603116
Part TypeDryer lint screen
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionCaptures lint and debris from the dryer airflow to help maintain airflow and drying efficiency.
Installation Notes
- Confirm the replacement against the dryer's model number before installation.
- Remove the old screen and install the replacement in the existing lint-screen housing.
- Ensure the screen is fully seated and secure before operating the dryer.
- Do not operate the dryer with a loose, damaged, blocked, or missing lint screen.
- Follow the appliance-specific owner's manual if the model uses a locking tab, hinged screen, or other retention feature.
Verified Compatible Models
7MWED1730JQ0, 7MWED2040JM0, 7MWED2140JB0, 7MWGD1730JQ0, 7MWGD1930JM0, 7MWGD2040JM0, 7MWGD2140JB0, CED7011LW0, CED7011LW1, CGD7011LW0, CGD7011LW1, MED4500MW0, MED5030MW0, MED5430MW0, MED6200KW0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
