Whirlpool Refrigerator Freezer door gasket, black W11625017, Fixes Freezer door does not seal tightly
Genuine Whirlpool OEM black freezer-door gasket that seals the perimeter of the freezer door and helps prevent warm air from entering the freezer compartment.
Confirm your full appliance model number before ordering.
Is This the Right Part?
✅ Cross Reference Information
W10433548
Common Symptoms
- Frost or ice buildup around the freezer-door perimeter
- Freezer temperature fluctuation or reduced cooling performance
- Visible gaps, cracks, tears, warping, or kinks in the gasket
- Freezer door that does not close or open normally because the gasket is deformed
- Moisture or condensation near the freezer-door seal
- Refrigerator running more often than usual due to air leakage
Check Before Replacing
- Visually inspect the entire gasket perimeter for tears, cracks, deformation, kinks, or sections pulled away from the door.
- With the door closed, check for visible gaps between the gasket and cabinet, especially at the corners.
- Clean the gasket sealing surface and the mating cabinet surface with a suitable mild cleaner, then recheck the seal.
- Perform a paper-strip check at several points around the closed door; unusually little resistance can indicate a sealing gap.
- Confirm that food packages, shelves, bins, or ice buildup are not preventing the freezer door from closing fully.
- Verify that the refrigerator is reasonably level and that the freezer door is aligned according to the appliance installation or owner documentation.
Pro Tip
Part Details
Installation Notes
- Disconnect power and secure the appliance according to the appliance service or owner instructions before beginning work.
- Compare the new gasket with the removed gasket and confirm the correct orientation and perimeter shape before installation.
- Remove the old gasket carefully and avoid damaging the freezer-door liner or retaining structure.
- Seat the replacement gasket evenly around the full door perimeter; do not leave corners twisted, folded, or kinked.
- After fitting, close the door and inspect the complete seal for gaps or sections that are not contacting the cabinet.
- If the gasket arrives compressed or deformed, allow it to return to shape using only a manufacturer-approved or service-documentation-approved method; avoid excessive heat that could damage the gasket or door.
Verified Compatible Models
10673002510, 10673002511, 10673003510, 10673003511, 10673009510, 10673009511, 59673002510, 59673003510, 59673003511, 59673009510, KFFS20EYBL00, KFFS20EYBL01, KFFS20EYBL02, KFFS20EYBL04, KFFS20EYMS00, WRF560SEHZ00, WRF560SEYM05
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
