Whirlpool Refrigerator/freezer door gasket, gray (GASKET-FIP) W11625072, Replaces W10760884, W10800788

Gray OEM snap-in door gasket that seals the perimeter of selected 36-inch refrigerator or freezer doors to prevent cold-air loss and warm-air entry.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible frost or condensation near the door perimeter
• Temperature fluctuation associated with air leakage at the door
• Door-ajar indication or switch contact problems when the gasket prevents the door from closing correctly
• Gasket appears dirty, warped, cracked, torn, or pulled out of its channel

Check Before Replacing

• Visually inspect the entire gasket perimeter for tears, gaps, deformation, or sections pulled out of the door channel.
• Check that the gasket-contacting cabinet surfaces are clean and free of food particles or debris.
• Close the door and inspect for visible gaps between the gasket and cabinet; do not force the door closed.
• Check whether shelves, bins, or food packages obstruct the door or prevent the gasket from contacting the cabinet.
• If available for the appliance, perform a gentle paper-strip check at several points around the closed gasket; resistance should be reasonably consistent. Do not use tools or excessive force.
• Confirm that the refrigerator is reasonably level, since leveling can affect door alignment and sealing.

Pro Tip

Part Details

Key Features

• Whirlpool genuine OEM refrigerator/freezer door gasket
• Gray color
• Snap-in installation design
• Approximately 36-inch door application
• Designed for selected refrigerator models
• Replaces W10760884 and W10800788

Installation Notes

• Verify the exact appliance model before installation; the gasket is for selected models only.
• Disconnect power before servicing if required by the appliance service instructions and keep hands clear of pinch points.
• Remove the old gasket and inspect the gasket channel and door edge for damage or debris before fitting the replacement.
• Seat the replacement gasket evenly into the door channel around the full perimeter; do not stretch, cut, glue, or otherwise modify it unless model-specific instructions explicitly require it.
• After installation, close the door gently and check the complete perimeter for uniform contact and gaps.

Verified Compatible Models

KBSD606ESS00, KBSD606ESS01, KBSD608EBS00, KBSD608EBS01, KBSD608ESS00, KBSD608ESS01, KBSD618ESS00, KBSD618ESS01, KBSD706MPS00, KBSD708MBS00, KBSD708MPS00, KBSD708MSS00, KBSN608EBS00, KBSN608EBS01, KBSN608EPA00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.