Whirlpool W11665769 Dishwasher Pump & Motor Assembly – Replaces W11085683, W10917110 | Fits Whirlpool, KitchenAid, Maytag

Is This the Part You Need?

The W11665769 is a complete pump and motor assembly that combines the circulation pump, drain pump, and motor into a single sealed unit. The circulation side draws water from the sump and forces it through the spray arms during the wash cycle; the drain side evacuates water from the tub at the end of each cycle. When the motor burns out, the impeller is damaged by debris, or the internal seals fail, the dishwasher may stop draining, stop washing, produce loud grinding or humming, or throw pump-related error codes. Because both functions share the same motor, a failed motor affects both wash and drain simultaneously. The W11665769 restores full wash and drain function in a single repair across Whirlpool, KitchenAid, Maytag, and Amana dishwashers.

Symptoms This Part Fixes

• Dishwasher won’t drain — water remaining in the bottom after the cycle
• Dishwasher fills but won’t wash — no spray arm action
• Loud grinding, humming, or buzzing during the wash or drain phase
• Dishes not getting clean due to weak or no water circulation
• Spray arms not rotating during wash cycle
• Dishwasher stopping mid-cycle with drain or circulation error codes
• Water leaking from the pump area at the bottom of the tub

Part Details

• Part Number: W11665769
• Replaces (Cross-Reference): W11085683, W10917110, W11164469
• Type: Complete Pump & Motor Assembly (Circulation + Drain + Motor)
• Brand: Whirlpool (OEM)
• Voltage: 120V AC
• Housing: Sealed integrated assembly — one part replaces the entire pump system
• Compatible Brands: Whirlpool, KitchenAid, Maytag, Amana
• Condition: New OEM
• Note: If only the wash circulation motor is needed, order W11612327 separately

Installation Notes

Skill Level: Intermediate-Advanced — requires tipping the dishwasher onto its back and disconnecting multiple hose and harness connections (60–90 minutes).

• Disconnect power at the circuit breaker and shut off the water supply before starting
• Remove the lower rack, spray arm, and filter assembly before tipping the unit
• Photograph all wire harness and hose connections before disconnecting — multiple connectors must be reinstalled in the correct positions
• Remove all mounting hardware and install the new assembly in the same orientation
• Reconnect all hoses and harness connectors, return the dishwasher to upright, reinstall the filter and spray arm, restore power and water
• Run a full test cycle and inspect for leaks at all hose connections before pushing the unit back into the cabinet

Compatible Models

Fits Whirlpool, KitchenAid, Maytag, and Amana dishwashers. Contact us with your full model number to confirm compatibility before ordering — or check the product tags for your model.

Contact us to confirm compatibility before ordering.