The W11676451 is a genuine OEM Whirlpool dryer heating element assembly — the primary heat source for your dryer's drying cycle. It converts electrical energy into heat via a high-resistance nickel-chromium coil housed in a metal frame, engineered for rapid heating, even temperature distribution, and a long service life of 7–12 years. This is the exact part your dryer was built with, ensuring a perfect fit and safe, reliable operation.

✓ Common Symptoms Fixed

This part resolves the following dryer problems:

• Dryer not heating at all
• Long dry times or clothes still damp after a full cycle
• Breaker trips when dryer is running
• Visible breaks or burn marks on the heating element
• Error codes related to the heating circuit
• Dryer stops mid-cycle

✓ Key Features & Specifications

• Genuine OEM Whirlpool part — exact factory replacement
• High-resistance nickel-chromium coil for efficient, even heat
• Metal mounting frame with spade connectors for direct fit
• Ceramic terminals for high-temperature insulation
• Compatible with Whirlpool, Maytag, Amana, Kenmore, Roper, and Crosley dryers (verify by model)
• Part Number: W11676451 | Replaces: 8577299, WP3387749
• Item #14 in the assembly diagram

✓ Buying Options

OEM / New: The W11676451 is the genuine Whirlpool factory part. This is the same heating element your dryer was originally built with — guaranteed fit, correct wattage, and full OEM quality. Recommended for safety-critical heating components.

✓ Replacement Part Numbers

W11676451 | 8577299 | WP3387749

✓ Installation Tips

CRITICAL SAFETY WARNING: Always unplug your dryer before servicing.

1. Unplug dryer from wall outlet.
2. Remove rear or lower access panel to access the heating element housing.
3. Disconnect wiring harness from the old element.
4. Remove mounting screws and take out the old heating element assembly.
5. Install new element in the same orientation and secure with screws.
6. Reconnect wiring harness.
7. Reinstall access panel.
8. Plug in dryer and run a test cycle to verify proper heating.

Safety Notes: Avoid touching the coil or terminals with bare hands. If the element fails repeatedly, check thermostats and venting for blockages. Allow dryer to run empty for 10 minutes after install to burn off any residue.

✓ Compatible Models

Fits Whirlpool, Maytag, Amana, Kenmore, Roper, and Crosley dryers — verify by model number. Confirmed compatible models include:

YMET3800TW0, YMET3800TW1, YMET3800TW2, YMET3800XW0, YMET3800XW1, YMET3800XW2, YLTE6234DQ5, YLTE6234DQ6, YWET3300SQ0, YWET3300SQ1, YWET3300SQ2, YWET3300XQ0, YWET3300XQ1, YWET3300XQ2, YWET4027EW0, YWET4027EW1, YWET4027HW0, YWET4027HW1, YWET4027HW2

✓ Frequently Asked Questions

Q: My dryer runs but produces no heat — is this the right part?
A: Yes. A failed heating element is the most common cause of a dryer not heating. We recommend testing the old element for continuity (expect 8–30Ω; infinite resistance = open circuit/failed element).

Q: What's the difference between W11676451 and WP3387749?
A: WP3387749 is an older OEM part number that W11676451 directly supersedes. They are functionally identical — W11676451 is the current active part number.

Q: Will this fit my Maytag or Kenmore dryer?
A: This element fits select Whirlpool-platform dryers including Maytag, Amana, Kenmore, Roper, and Crosley. Always verify by your full model number before ordering. See our dryer won't heat guide for diagnosis help.

Q: Can I install this myself?
A: Yes — this is a medium-difficulty repair (2/5). Professional repair time is 20–30 minutes; DIY is 30–45 minutes. Basic tools and safe handling of 240V wiring are required. Always unplug the dryer first.

Q: Do you ship to Canada?
A: Yes — XPart Supply is based in Canada and ships fast across Canada and the US. See our Whirlpool dryer parts Canada page for more information.

✓ Model-Specific Repair Pages