Washer Console Not Labeled Correctly? Control Panel Overlay W11680401 – Fix Missing or Worn Cycle Markings Fast
If your Whirlpool top-load washer's control panel markings are worn, faded, or missing entirely, this is the part you need. In most WTW6157PW washers, the printed cycle and option labels are carried on a separate fascia overlay — not printed directly on the housing. When it fails or is damaged, the console becomes unreadable and cycle selection is guesswork. ⚡ Common cosmetic and functional failure point in Whirlpool-built top-load washers. Part W11680401 is the genuine OEM replacement fascia that restores all printed cycle markings and returns the control console to factory appearance.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Washer powers on and runs cycles normally
- ✔ Electronic control and encoder functions work correctly
- ✔ Console housing and knob are intact
- ✔ ONLY problem is worn, faded, cracked, or missing printed overlay markings
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Cycle and option labels are faded or completely worn off
- Overlay is cracked, peeling, or bubbling away from the console
- Printed markings are scratched or damaged from cleaning
- Console looks worn but washer operates normally
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this overlay restores factory console appearance immediately.
📦 Part Details
- Part Number: W11680401
- Type: Control panel fascia and printed overlay — decorative front surface of the control console carrying all cycle and option markings
- Replaces: W11656592
- Brand: Whirlpool (OEM)
- Note: This is the overlay only. Does not include electronic control assembly W11627516, console housing W11569437, or control knob W11662669.
If the overlay is worn, inspect the control knob (W11662669) at the same time — knobs on high-use washers often show matching wear. Replacing both in one service call saves a second disassembly.
⚙️ Installation
Skill Level: EASY — 15–30 minutes. Disconnect power before servicing. Remove the control console screws, carefully peel the old overlay from the console face, align and press the new overlay into position, and reassemble. No special tools required. Confirm your complete model revision (WTW6157PW0 or WTW6157PW1) before ordering to ensure correct overlay layout.
✓ Compatible Models
Confirmed compatible with WTW6157PW0 and WTW6157PW1. Contact us to verify your model number before ordering.
💡 Pro Tip
W11680401 is the printed fascia only — it is not the electronic control assembly (W11627516) or the encoder. If your washer is failing to start cycles, not responding to knob input, or displaying error codes, the issue is the control board or encoder, not this overlay. Confirm the symptom before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
