GE / General Electric Range 8-inch Radiant Surface Element WB30T10132, Replaces WB30T10128

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• 8-inch cooking zone does not heat
• Surface element heats unevenly or more slowly than expected
• Element appears open or damaged and the cooking zone remains cold

Check Before Replacing

• Confirm the appliance model and that WB30T10132 is specified for the affected 8-inch position.
• With the range disconnected from power and fully cool, visually inspect the element and accessible terminals for visible damage, burning, or loose connections.
• If qualified to perform appliance electrical testing, check element continuity only with power disconnected; an open circuit supports an element fault but does not by itself rule out a switch, wiring, or control problem.
• If the element cycles on and off while heating, compare its behavior with GE's normal radiant-element cycling guidance before identifying it as defective.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power at the range plug or circuit breaker and allow the cooktop to cool completely before service.
• Use the owner or service information for the exact appliance model because access and connector arrangements vary by model.
• Avoid forcing the glass cooktop, element supports, or electrical connectors during removal and installation.
• After reassembly, restore power and verify operation using the model's normal controls; stop if wiring, terminals, or the glass surface show damage.

Verified Compatible Models

CES700M2N1S5, CES700M2N2S5, CES700M2N3S5, CES700M2N4S5, CES750M2N1S5, CES750M2N2S5, CES750M2N3S5, CES750M2N5S5, EER2000M02BB, EER2000M02CC, EER2000M02WW, EER2001M02SS, EER2002M02BS, JB400DP1BB, JB400DP1WW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.