Menu
ℹ️ This part supersedes WG04A02520 and WE01X10269. You are viewing the current OEM replacement.
Dryer Squeaking or Thumping? Drum Roller WG01F06310 – Fix Drum Noise Fast
If your GE dryer is squeaking, thumping, or grinding during every cycle, the drum roller is the most likely cause. In GE-built dryers, the drum rollers support the drum and allow it to spin smoothly — when they wear flat, crack, or seize, the noise starts immediately and worsens with every load. ⚡ Common failure point in GE front-load and top-load dryer models. Part WG01F06310 is the current OEM drum roller — the direct supersession of WG04A02520 and WE01X10269 — that restores quiet, smooth drum rotation immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dryer powers on and heats normally
- ✔ Drum rotates but makes squeaking, thumping, or grinding noise
- ✔ Drive belt is intact and not slipping
- ✔ Idler pulley has been checked and is not the source of noise
- ✔ ONLY problem is drum noise — dryer otherwise functions correctly
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Loud squeaking or squealing during every cycle — most common customer complaint
- Thumping or rhythmic banging as drum rotates
- Grinding noise that worsens as the dryer warms up
- Drum wobbling or not rotating smoothly
- Excessive vibration felt through the cabinet
- Drum dragging, slowing, or stopping mid-cycle
✔ If these symptoms match, this is the most likely failed component in the drum support system.
✔ In most cases, replacing the drum roller restores quiet, smooth operation immediately.
📦 Part Details
- Part Number: WG01F06310
- Type: GE Dryer Drum Roller — Current OEM Version
- Replaces: OEM direct-fit drum roller — supersedes WG04A02520, WE01X10269, DC97-16782A (no modification required)
- Brands: GE
⚠️ Recommended While Repairing:
Always inspect the drive belt and idler pulley while the drum is out — these components wear at the same rate as the rollers and replacing them together eliminates a second disassembly call. Contact us to bundle roller, belt, and idler as a kit.
Always inspect the drive belt and idler pulley while the drum is out — these components wear at the same rate as the rollers and replacing them together eliminates a second disassembly call. Contact us to bundle roller, belt, and idler as a kit.
⚙️ Installation
Skill Level: MODERATE — 45 to 75 minutes. Unplug the dryer before beginning. Remove the front panel and lift out the drum to access the roller assemblies on the rear bulkhead. Remove the retaining clip, slide off the worn roller, and press the new WG01F06310 onto the shaft. Reassemble in reverse order and run a short cycle to confirm quiet operation. Replace all rollers at the same time — if one has failed, the others are at the same wear stage.
✓ Compatible Models
Confirmed compatible with PCVH480EK0WW, PCVH480EK1WW, plus additional GE dryer models. Contact us to verify your model number before ordering.
💡 Pro Tip — Replace All Rollers at Once:
Drum rollers wear evenly across all positions — if one has failed, the others are at the same wear stage. Replacing all rollers in a single repair takes only minutes longer and eliminates a repeat disassembly within the next few months. While you have the drum out, inspect the idler pulley and drive belt too — a full drum support kit saves a second service call.
Drum rollers wear evenly across all positions — if one has failed, the others are at the same wear stage. Replacing all rollers in a single repair takes only minutes longer and eliminates a repeat disassembly within the next few months. While you have the drum out, inspect the idler pulley and drive belt too — a full drum support kit saves a second service call.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
