Genuine OEM Replacement Part
Range Wobbling, Rocking, or Sitting Uneven? A Broken Leveling Leg Is the Cause.
Part# WG02A00475
X-Ref: WB02X10521 · WB02T10036 · 164D3434P001
GE · Hotpoint · RCA
A broken or missing leveling leg doesn't just make the range rock — it throws off the cooktop angle, causes pots to slide, and puts uneven stress on the range frame over time. The WG02A00475 GE OEM Range Leveling Leg is the factory-specified replacement: a threaded, height-adjustable metal foot that restores a stable, level stance on any floor surface.
✓ Symptoms This Fixes
- Range wobbles or rocks when touched or during cooking
- Range sits visibly uneven or tilted on the floor
- Pots and pans sliding to one side on the cooktop
- Oven door not closing flush or hanging at an angle
- Broken, cracked, or missing leveling foot on one corner
- Range was moved and now won't sit level again
✓ Part Details
-
OEM Part Number: WG02A00475
-
Cross-References: 164D3434P001, WB02T10036, WB02X10521
-
Brand: GE OEM
-
Component: Range / oven leveling leg (adjustable foot)
-
Material: Durable metal construction with threaded height adjustment
-
Appliance Type: Gas and electric ranges / ovens
-
Genuine OEM: Yes — factory-specified replacement
Pro Tip — Replace All Four Legs When One Fails:
Leveling legs wear at similar rates. If one leg has cracked or collapsed, the others are likely close behind — especially on older ranges that have been moved multiple times. Replacing all four at once takes only a few extra minutes and eliminates the callback when a second leg fails within months. It also makes achieving a perfectly level cooktop much easier when all four legs are the same age and condition.
✓ Installation Notes
-
Skill Level: Beginner-friendly — no tools required
-
Estimated Time: 5–15 minutes
-
Key Steps: Pull range away from wall → Tilt range back carefully to access front legs, or slide a thin board under the front to lift slightly → Thread old leg out counterclockwise → Thread new leg in clockwise until snug → Adjust height by turning leg in or out → Set range back in position → Use a spirit level on the cooktop to verify front-to-back and side-to-side alignment → Fine-tune each leg until level
-
Safety: Disconnect power before tilting or moving the range. Have a second person assist when tilting — ranges are heavy and can tip unexpectedly.
✓ Why XPart Supply
- Canadian Business Since 1996 — 30 Years of Appliance Parts Expertise
- Guaranteed Fit — OEM parts matched to your exact model
- Fast Canada-Wide Shipping
- Trusted by DIYers and Appliance Technicians Across Canada
- Expert support to confirm compatibility before you order
✓ Frequently Asked Questions
How do I know which leveling leg is broken?
Rock the range gently from corner to corner. The corner that lifts off the floor when you press the opposite corner is the one with the failed or missing leg. You can also look underneath the front corners — a broken leg will be visibly shorter, cracked, or absent entirely.
Is WG02A00475 the same as WB02X10521?
Yes — WB02X10521, WB02T10036, and 164D3434P001 are all cross-reference part numbers for the same GE range leveling leg. WG02A00475 is the current active OEM part number and is a direct replacement for all of these.
Will this leg fit my Hotpoint or RCA range?
Many Hotpoint and RCA ranges are manufactured by GE and share the same leveling leg. WG02A00475 may be compatible with certain Hotpoint and RCA models. Contact XPart Supply with your full model number to confirm fit before ordering.
Does XPart Supply ship range parts across Canada?
Yes! XPart Supply ships OEM and aftermarket appliance parts Canada-wide with fast, reliable shipping. We've been serving Canadian appliance repair customers since 1996 and offer guaranteed fit on all parts. Contact us if you need help confirming compatibility with your model.
✓ Model-Specific Repair Pages