Menu
Refrigerator Not Making Ice? Ice Maker Assembly WG03A04194 – Fix Ice Production Fast
If your GE Cafe refrigerator has stopped producing ice, this is the part you need. In most GE Cafe refrigerators, a failed ice maker assembly is the root cause of no ice production. When it fails, the ice maker may cycle without harvesting, produce hollow or misshapen cubes, or stop entirely — leaving you without ice. ⚡ Common failure point in GE-built French door and counter-depth refrigerators. Part WG03A04194 is the genuine OEM replacement that restores reliable small-cube ice production with no modifications required.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Refrigerator powers on and runs normally
- ✔ Cooling and freezing functions work correctly
- ✔ Water supply line and inlet valve confirmed OK
- ✔ Ice bin and ejector arm are undamaged
- ✔ ONLY problem is no ice production or poor ice quality
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Ice maker stopped producing ice — most common complaint
- Ice maker cycles but no ice drops into the bin
- Hollow, small, or misshapen ice cubes
- Ice maker arm stuck in the up (off) position
- Ice maker makes noise but doesn't harvest
- Freezer temperature normal but ice production has stopped
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this ice maker assembly restores normal ice production immediately.
📦 Part Details
- Part Number: WG03A04194
- Type: Complete small-cube ice maker assembly
- Replaces: OEM direct-fit ice maker assembly — supersedes WG03A03464, WG03L11691 (no modification required)
- Brands: GE, GE Cafe, GE Profile
⚠️ Recommended While Repairing:
Check your water inlet valve and supply line while the ice maker is out — a partially clogged valve is a common secondary cause of poor ice production. Replacing both at the same time eliminates the most common failure points in one service call.
Check your water inlet valve and supply line while the ice maker is out — a partially clogged valve is a common secondary cause of poor ice production. Replacing both at the same time eliminates the most common failure points in one service call.
⚙️ Installation
Skill Level: EASY — 20–30 minutes. Disconnect power to the refrigerator before beginning. Remove the ice bin, disconnect the wire harness from the existing ice maker, unscrew the mounting screws, and swap in the new assembly. Reconnect the harness, reinstall the bin, and restore power. Allow 24 hours for the first full ice cycle to complete.
✓ Compatible Models
Confirmed compatible with CVE28DP4NCW2, CVE28DP4NBW2, CVE28DP3NBD1, CVE28DP2NBS1, CQE28DM5NBS5, plus additional GE Cafe counter-depth and French door models. Contact us to verify your model number before ordering.
💡 Pro Tip
Replace the Water Filter at the Same Time:
A clogged or expired water filter restricts flow and can cause a brand-new ice maker to underperform. If your filter is more than 6 months old, swap it out during this repair — it takes 2 minutes and protects your new part investment. GE recommends replacing every 6 months for optimal ice quality.
A clogged or expired water filter restricts flow and can cause a brand-new ice maker to underperform. If your filter is more than 6 months old, swap it out during this repair — it takes 2 minutes and protects your new part investment. GE recommends replacing every 6 months for optimal ice quality.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
