DRYER DRUM WILL NOT TUMBLE
GE Dryer Drum Belt WG03F00846, Fixes Dryer drum will not tumble
Genuine OEM GE dryer drum belt, approximately 1/4 inch wide by 87 inches long, flat belt with 4 ribs and 3 grooves. The belt transfers power from the motor pulley to rotate the dryer drum. Also identified as a dryer drive belt.
Part WG03F00846Replaces 109B8509, 148270, 199B2222P001, 20103618, 43NX0027, 872H4, 878H4, WE12X10014, WE12X42, WE12X82, WE12X0042, WE12X0082, WE12X42P, WE12X42R, WE12X82E, WE12X82P, WE12X82RGE
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWG03F00846
Replaces109B8509, 148270, 199B2222P001, 20103618, 43NX0027, 872H4, 878H4, WE12X10014, WE12X42, WE12X82, WE12X0042, WE12X0082, WE12X42P, WE12X42R, WE12X82E, WE12X82P, WE12X82R
ManufacturerGE
Appliance TypeDryer
Part TypeDryer Drum Belt
✅ Cross Reference Information
Current Part NumberWG03F00846
Replaces109B8509, 148270, 199B2222P001, 20103618, 43NX0027, 872H4, 878H4, WE12X10014, WE12X42, WE12X-42, WE12X82, WE12X0042, WE12X0082, WE12X42P, WE12X42R, WE12X82E, WE12X82P, WE12X82R
Common Symptoms
- Motor may run while the drum does not turn.
- Unusual or loud operating noise may occur.
- A worn or slipping belt may contribute to ineffective tumbling and extended drying.
Check Before Replacing
- Disconnect power before any inspection. With access only as permitted by the model-specific service instructions, inspect the belt for breakage, cracking, fraying, glazing, or displacement from its drive path.
- Confirm the installed belt matches the required flat, 4-rib/3-groove profile and approximately 87-inch length by 1/4-inch width.
- Do not assume the belt is the sole cause: inspect for freely moving drum-support and belt-tension components before attributing a no-tumble condition to the belt.
Pro Tip
When the belt is accessible, check its condition and confirm the exact ribbed profile; incorrect belt geometry or a belt damaged by another rotating component can cause repeat failure.
Part Details
Part NumberWG03F00846
Part TypeDryer Drum Belt
ManufacturerGE
Appliance TypeDryer
Primary FunctionTransfers rotary power from the dryer motor pulley to the drum so the drum tumbles during the drying cycle.
Installation Notes
- Disconnect electrical power before servicing; for a gas dryer, also shut off the gas supply before cabinet service.
- Install and route the belt according to the service instructions for the exact dryer model; belt routing and cabinet access vary by model.
- Before reassembly, confirm the belt is seated on the motor-pulley drive path and is not visibly twisted, damaged, or displaced.
Verified Compatible Models
DBLR333ET0WW, DCLR333ET1AA, DCLR333ET1WW, DDG7189SBLWW, GTD33EASK0WW, GTD33EASK1WW, GTD33EASK2WW, GTD33GASK0WW, GTD33GASK1WW, GTD33GASK2WW, GTD40EBMK0DG, GTD40EBMK1DG, GTD40EBMK2DG, GTD40GBMK0DG, GTD42EAMJ0WW
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
