Refrigerator Not Making Ice? GE Ice Maker WG03F08161 – Fix Ice Production Failure Fast
If your GE refrigerator has completely stopped producing ice, the ice maker assembly is the most common cause. In most GE and GE Profile refrigerators, this is caused by a failed ice maker module or assembly. When it fails, the ice maker stops cycling entirely — no ice is produced, the tray doesn't fill, and the unit may appear frozen or stuck. ⚡ Common failure point in GE-built refrigerators with bottom-mount or column freezer configurations. Part WG03F08161 is the genuine OEM replacement that restores full ice production and normal cycling operation.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Refrigerator powers on and cools normally
- ✔ Water supply line is connected and water dispenser works
- ✔ Freezer temperature is at or below 0°F (-18°C)
- ✔ ONLY problem is the ice maker not producing or cycling ice
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Ice maker stopped producing ice completely
- Ice tray not filling with water
- Ice maker arm stuck or not cycling
- Ice maker frozen solid or making grinding noise before stopping
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this ice maker assembly restores normal operation immediately.
📦 Part Details
- Part Number: WG03F08161
- Type: OEM Ice Maker Assembly — complete module with motor, thermostat, and ejector
- Replaces: WR30X30098, 224D5692G001, 200D1181G109
- Brands: GE, GE Profile, Monogram
Check and replace the water inlet valve if water flow to the ice maker was restricted — a partially clogged valve is a common secondary cause of ice maker failure and takes only minutes to swap while the unit is already pulled out.
⚙️ Installation
Skill Level: MODERATE — 20–35 minutes. Disconnect power before servicing. Remove the ice bin and existing ice maker mounting screws, disconnect the wire harness, and slide the old unit out. Reverse the process with the new assembly, reconnect the harness, and restore power — the ice maker will begin its first cycle within 24 hours.
✓ Compatible Models
Confirmed compatible with ZISS360DNBSS, ZISS420DNBSS, ZISS480DNBSS, ZISS480DPESS, ZIF241NPNAII, ZIF361NBRII, ZIF361NPRAII, ZIF181NPNAII, ZIF301NPNAII, ZIF361NBRAII plus additional GE and GE Profile models. Contact us to verify your model number before ordering.
💡 Pro Tip
If your ice maker failed due to restricted water flow, replacing only the ice maker module may result in the same failure within months. While you have the unit serviced, inspect or replace the water inlet valve — it's a $20–$40 part that can save a repeat service call and protect your new ice maker investment.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
