⚠ This part has been superseded by a newer OEM part number.
WG03F08900 has been replaced by WG03F09823. We recommend ordering the current part for guaranteed fit and full lifespan.
Order WG03F09823 Instead →
GENUINE OEM REPLACEMENT PART
GE Refrigerator Not Cooling or Showing Error Codes — WG03F08900 Main Control Board
Replaces WG03F04064 Replaces WG03F05979 Replaces 239D4391G010 Fits GE & GE Profile
Is This the Part You Need?
This is the OEM main control board for GE and GE Profile French Door refrigerators originally built with part number WG03F08900. It also cross-references WG03F04064, WG03F05979, WG03F08617, 239D4391G010, and WR55X38248. If your model number appears in the compatible list below and your fridge has lost cooling, is running constantly, or is throwing error codes, this is the board to replace. Note: this part has been superseded by WG03F09823 — see the banner above to order the current version.
Symptoms of a Failed Main Control Board
- Refrigerator not cooling or freezer not freezing
- Compressor runs constantly or won’t start
- Error codes on the display (e.g., FF, CC, 1C, 6C, PF)
- Evaporator or condenser fans not running
- Defrost cycle not activating — heavy ice buildup on evaporator coils
- Temperature fluctuations or inconsistent cooling
- Display panel blank, flickering, or unresponsive
Part Details
-
OEM Part Number: WG03F08900
-
Cross-References: WG03F04064, WG03F05979, WG03F08617, 239D4391G010, WR55X38248
-
Superseded By: WG03F09823 (current OEM — recommended)
-
Part Type: Main Electronic Control Board
-
Brand: GE (General Electric)
-
Condition: New OEM
-
Compatible Series: GWE23, GYE22, CWE23, CYE22, CFE28, PFE28, PYE22, PYD22, ZWE23 French Door models
Installation Notes
-
Skill Level: Intermediate — basic appliance repair experience recommended
-
Always disconnect power before removing or installing the control board
- Photograph all wire harness connections before disconnecting
- Board is typically located behind the rear interior panel or at the back of the unit — consult your model’s service manual for exact location
- Standard Phillips screws only — no torque-sensitive fasteners
- Allow 24 hours after installation for the refrigerator to reach set temperature before evaluating performance
Compatible Models (Partial List)
CWE23SP2MJS1, CWE23SP2MIS1, CWE23SP3MFD1, CWE23SP3MID1, CWE23SP3MJD1, CWE23SP4MIW2, CWE23SP4MJW2, CYE22TP2MBS1, CYE22TP2MFS1, CYE22TP2MIS1, CYE22TP2MJS1, CYE22TP2MKS1, CYE22TP2MLS1, CYE22TP3MID1, CYE22TP3MKD1, CYE22TP3MLD1, CYE22TP4MGW2, CYE22TP4MIW2, CYE22TP4MJW2, CYE22TP4MKW2, CYE22UP2MIS1, CYE22UP2MKS1, CFE28TP3MJD1, CFE28TP4MFW2, CFE28TP4MLW2, GWE23GYNHFS, GWE23GMNHES, GYE22GYNIFS, GYE22GMNIES, PFE28PMKBES, PYE22PYNGFS, PYD22KYNIFS, ZWE23ESNGSS, ZWE23ESNHSS, ZWE23NSTBSS, ZWE23PSNGSS, ZWE23PSNHSS, ZWE23PSHCSS — confirm your model number before ordering.
💡 Pro Tip — Check the Thermistor Before You Close Up:
A failing thermistor (temperature sensor) is one of the most common causes of premature control board failure — it sends incorrect voltage signals that overwork the board over time. Before reassembling, test the fresh food and freezer thermistors with a multimeter. Replacing a failed thermistor at the same time prevents a repeat board failure and saves a second service call.
✓ Model-Specific Repair Pages