GE Refrigerator Freezer door gasket, black WG03L00638, Replaces WR24X10185

Black gasket used on the freezer-section door of selected GE refrigerators. The exact part number WG03L00638 is directly listed in refrigerator parts diagrams and databases.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible cuts, tears, rips, deformation, or a loose section of the freezer-door gasket.
• A visible gap or uneven contact between the closed freezer-door gasket and cabinet frame.
• Frost or ice accumulation in the freezer when the door is not sealing properly.

Check Before Replacing

• With the freezer door open, inspect the gasket for cuts, tears, rips, wrinkles, or sections pulled out of the door retainer.
• Remove packages or other items that could prevent the freezer door from closing fully, then close the door and visually check for even gasket contact around the cabinet opening.
• Confirm the gasket is fully seated in its door groove, especially at the corners.
• Check that the refrigerator is level and that the freezer door closes normally; door alignment or an obstruction can also cause a sealing concern.

Pro Tip

Part Details

Key Features

• Black freezer-door gasket.
• Designed to seat in the door’s gasket retainer/groove.
• Exact archived GE catalog identity is "GASKET BLACK."

Installation Notes

• Disconnect power before replacing or adjusting the freezer-door gasket.
• For GE top-freezer refrigerators, a gasket that has pulled loose may be pressed back into its retainer; ensure the gasket’s rear dart is fully and evenly pushed into the mating groove.
• After installation, close the door and confirm the gasket is smooth/flat and seals against the front of the cabinet around the full perimeter.
• For deformation or wrinkles, GE advises using a blow dryer on a low setting while smoothing the affected area by hand.

Verified Compatible Models

GTH18ISXARSS, GTH18SBTVRSS, GTK18IBXARBS, GTS18SHSVRSS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.