GE Washer Drain Hose Clip WG04A00640, Replaces WH16X513, LA188, WH16X0513

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drain hose visibly loose, sagging, or pulling away from the washer cabinet
• Drain hose shifts or vibrates during washer operation
• Water leakage near the rear or external drain-hose routing area
• Unusual noise caused by a loose drain hose contacting the cabinet or surrounding surfaces

Check Before Replacing

• With the washer unplugged, visually inspect the clip for cracking, breakage, distortion, or absence.
• Gently check whether the external drain hose is still held securely at the cabinet mounting point; do not pull forcefully.
• Inspect the hose near the clip for kinks, abrasion, disconnection, or visible leakage.
• If leakage is present, trace the water source rather than assuming the clip is the cause, because other drain-system components can produce similar symptoms.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before inspecting or replacing the clip.
• Route the external drain hose through the original cabinet mounting location and secure it with the clip.
• Ensure the hose is not kinked, sharply bent, or rubbing against moving or sharp surfaces.
• After installation, verify that the hose remains supported and check for leaks during a cautious test cycle.
• Confirm the appliance model and the original clip location before installation; similar-looking hose clips may serve different purposes.

Verified Compatible Models

GBAN2800F0WW, GCAP1800D1WW, GTAN2800D0WW, GTAN2800D1WW, GTAN2800D2WW, GTAN4250D0WW, GTAN4250D1WW, GTAN4250D2WW, GTAN5250D2WW, GTAP1800D0WW, GTAP1800D1WW, GTW180SSJ0WW, MTAP1100F0WW, MTAP1100F1WW, MTAP1100F2WW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.