Dishwasher Leaking at the Faucet Connection or No Water Filling? WG04F00007 Faucet Adapter – Fix Water Supply Failures Fast

If your GE dishwasher is leaking at the faucet connection, not filling with water, or the supply line won’t seat properly, the faucet adapter is the most common cause. In most GE dishwashers, the faucet adapter connects the dishwasher water supply line to the household faucet or supply valve. When it cracks, strips, or fails to seal, water leaks at the connection point or the dishwasher receives no water at all. ⚡ Common failure point in GE portable and countertop dishwashers. Part WG04F00007 is the genuine OEM replacement that restores a leak-free water supply connection in a direct-fit swap.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Dishwasher powers on and cycles run normally
• ✔ Household water supply pressure is confirmed OK
• ✔ Water inlet valve on the dishwasher tests OK (not blocked or failed)
• ✔ Supply hose is intact with no cracks or kinks
• ✔ ONLY problem is leaking or poor connection at the faucet adapter fitting

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Water dripping or pooling at the faucet connection during or after a cycle
• Dishwasher not filling — cycle runs but no water enters the tub
• Adapter threads stripped or cracked — won’t tighten or seal
• Adapter leaks only under water pressure during fill cycle
• Visible mineral buildup or corrosion on the adapter body
• Adapter pulls away from faucet during cycle due to failed seat

✔ If these symptoms match, the faucet adapter is the most likely failed component in the system.

✔ In most cases, replacing this faucet adapter restores a leak-free water supply connection immediately.

📦 Part Details

• Part Number: WG04F00007
• Type: Dishwasher Faucet Adapter — water supply connection fitting for portable/countertop dishwashers
• Replaces: OEM direct-fit adapter — supersedes WD1X1447 (no modification required)
• Brands: GE, Hotpoint

⚙️ Installation

Skill Level: Easy — 10–15 minutes. Turn off the water supply before beginning. Unscrew the old adapter from the faucet aerator, thread the new WG04F00007 adapter onto the faucet by hand until snug, then tighten a quarter-turn with pliers — do not overtighten or you risk cracking the adapter body. Reconnect the dishwasher supply hose, restore water supply, and run a short fill cycle to confirm no leaks before leaving unattended.

💡 Pro Tip

Model hub pages: Contact us to verify your model number — hub pages for GE portable dishwasher models coming soon.