WG04F00657 Dishwasher Circulation Pump & Motor Assembly
WG04F00657 Dishwasher Circulation Pump & Motor Assembly
WG04F00657 Dishwasher Circulation Pump & Motor Assembly
WG04F00657 Dishwasher Circulation Pump & Motor Assembly

WG04F00657 Dishwasher Circulation Pump & Motor Assembly

Price
$184.21
Buying Options : Used

Product variant with selected options does not exist!

Frequently Bought Together

Confirm This Fits Your Model
Not sure where to find your model number? See guide →

What Customers Say About XPart Supply

4.82 ★ (250)
Verified
Genuine OEM Replacement Part

WG04F00657 Dishwasher Circulation Pump & Motor Assembly

Part# WG04F00657 Replaces WD26X10015 / WD26X10018 Fits GE Fits Hotpoint

Dishwasher Not Cleaning? Circulation Pump WG04F00657 – Fix Poor Water Flow Fast

A failed circulation pump is the #1 reason GE dishwashers stop cleaning dishes effectively. In most GE and Hotpoint dishwashers, this is caused by a seized or burned-out circulation pump and motor assembly. When it fails, water pressure drops to zero — spray arms stop spinning, dishes come out dirty, and the wash cycle runs silently with no water movement. ⚡ Common failure point in GE-built dishwashers after 5–8 years of use. Part WG04F00657 is the genuine OEM replacement that restores full water circulation and cleaning performance immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

  • ✔ Dishwasher powers on and runs a full cycle normally
  • ✔ Water fills the tub but dishes come out dirty or wet
  • ✔ Water supply and inlet valve confirmed OK
  • ✔ Drain pump works — water empties at end of cycle
  • ✔ ONLY problem is no spray pressure / spray arms not spinning during wash

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

  • Dishes not getting clean — food residue left after full cycle
  • Spray arms not spinning or barely moving
  • Dishwasher runs silently — no water circulation sound
  • Dishes and glasses come out with spots or film
  • Burning smell from under the dishwasher during cycle
  • Dishwasher hums but no water pressure at spray arms

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this circulation pump and motor assembly restores normal cleaning performance immediately.

📦 Part Details

  • Part Number: WG04F00657
  • Type: Dishwasher Circulation Pump & Motor Assembly
  • Replaces: OEM direct-fit assembly — supersedes WD26X10015, WD26X10018 (no modification required)
  • Brands: GE, Hotpoint, RCA
⚠️ Recommended While Repairing:
While the dishwasher is apart, inspect the door gasket and spray arm bearings — both wear at the same rate as the pump and are inexpensive to replace. Doing it now avoids a second service call within 6–12 months.

⚙️ Installation

Skill Level: MODERATE — 45–75 minutes. Disconnect power and shut off the water supply before servicing. Pull the dishwasher forward from the cabinet, disconnect the wiring harness and water lines, remove the lower spray arm and pump housing cover, then swap the assembly. Torque all hose clamps evenly and run a short test cycle to confirm no leaks before pushing the unit back into the cabinet.

✓ Compatible Models

Confirmed compatible with EDW4000G00BB, EDW4000G00CC, EDW4000G00WW, EDW4000G02BB, EDW4000G02CC, EDW4000G02WW, EDW4000G03BB, EDW4000G03CC, EDW4000G03WW, EDW4060G00SS, EDW4060G02SS, EDW4060G03SS, GHDA960K00BB, GHDA960K00WW, GHDA960K03BB, GHDA960K03WW, GHDA980K00BB, GHDA980K00WW, GHDA980K03BB, GHDA980K03WW, GHDA986K00SS, GHDA986K03SS, GSD6000G02BB, GSD6000G02CC, GSD6000G02WW, GSD6100K00BB, GSD6100K00CC, GSD6100K00WW, GSD6100K03BB, GSD6100K03CC. Contact us to verify your model number before ordering.

💡 Pro Tip

Clean the Filter Before Installing:
A clogged filter is often what caused the original pump to burn out in the first place. Before installing the new assembly, remove and thoroughly clean the filter basket and sump area. This takes 5 minutes and can double the lifespan of your new pump by ensuring unrestricted water flow from day one.

Model Hubs: WG04F00657 Part Hub, WD26X10015 Hub, WD26X10018 Hub

✓ Model-Specific Repair Pages

Frigidaire DISHWASHER Oven Parts & Repair Guide MODEL GSD6100K03CC GSD6100K03BB GSD6100K00WW GSD6100K00CC GSD6100K00BB GSD6000G02WW GSD6000G02CC GSD6000G02BB GHDA986K03SS GHDA986K00SS GHDA980K03WW GHDA980K03BB GHDA980K00WW GHDA980K00BB GHDA960K03WW GHDA960K03BB GHDA960K00WW GHDA960K00BB EDW4060G03SS

✅Compatibility & Cross Reference

Part number WG04F00657 replaces WD26X10015, WD26X10018

EDW4000G00BB, EDW4000G00BB, EDW4000G00CC, EDW4000G00CC, EDW4000G00WW, EDW4000G00WW, EDW4000G02BB, EDW4000G02BB, EDW4000G02CC, EDW4000G02CC, EDW4000G02WW, EDW4000G02WW, EDW4000G03BB, EDW4000G03BB-GE, HEDW4000G03CC, EDW4000G03CC, EDW4000G03WW, EDW4000G03WW, EDW4060G00SS, EDW4060G00SS, EDW4060G02SS, EDW4060G02SS, EDW4060G03SS, EDW4060G03SS, GHDA960K00BB, GHDA960K00BB, GHDA960K00WW, GHDA960K00WW, GHDA960K03BB, GHDA960K03BB, GHDA960K03WW, GHDA960K03WW, GHDA980K00BB, GHDA980K00BB, GHDA980K00WW, GHDA980K00WW, GHDA980K03BB, GHDA980K03BB, GHDA980K03WW, GHDA980K03WW, GHDA986K00SS, GHDA986K00SS, GHDA986K03SS, GHDA986K03SS, GSD6000G02BB, GSD6000G02BB, GSD6000G02CC, GSD6000G02CC, GSD6000G02WW, GSD6000G02WW, GSD6100K00BB, GSD6100K00BB, GSD6100K00CC, GSD6100K00CC, GSD6100K00WW, GSD6100K00WW, GSD6100K03BB, GSD6100K03BB, GSD6100K03CC, GSD6100K03CC

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps