WG04F03547 Washer Water Level Switch
WG04F03547 Washer Water Level Switch

GE (General Electric) Washer Water Level Switch WG04F03547, Replaces WH12X998, WH12X10032, WH12X10043, WH12X10065

XPart Number XP10011112
$41.31
In stock and ready for shipping
Buying Options: OEM Genuine

Product variant with selected options does not exist!

Frequently Bought Together

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →
INCORRECT WATER LEVEL DURING FILLING

GE (General Electric) Washer Water Level Switch WG04F03547, Fixes Incorrect water level during filling

Genuine OEM washer water-level switch (also called a pressure switch) that senses and controls the washer's water level.

Part WG04F03547Replaces WH12X998, WH12X10032, WH12X10043, WH12X10065GE (General Electric)
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part NumberWG04F03547
ReplacesWH12X998, WH12X10032, WH12X10043, WH12X10065
ManufacturerGE (General Electric)
Appliance TypeWasher
Part TypeWasher Water Level Switch

✅ Cross Reference Information

Current Part NumberWG04F03547
ReplacesWH12X998, WH12X10032, WH12X10043, WH12X10065

Common Symptoms

  • Washer does not fill
  • Washer continues filling or overfills
  • Washer fills but does not advance properly
  • Washer may not start, agitate, or spin when the control does not receive the expected water-level signal

Check Before Replacing

  • Disconnect power before inspecting the switch or its connections.
  • Visually inspect the pressure hose for kinks, cracks, loose connections, or visible obstruction.
  • Check that the switch wiring connector is fully seated and shows no visible damage.
  • If the washer agitates but does not fill, reset the water-level control as described for the specific washer model and retry once.
  • Do not conclude that the switch is defective without also checking water supply, inlet-valve screens, wiring, and the pressure hose.

Pro Tip

Check the pressure hose and its connections before replacing the switch; a kinked, leaking, or obstructed hose can prevent the switch from sensing tub pressure correctly.

Part Details

Part NumberWG04F03547
Part TypeWasher Water Level Switch
ManufacturerGE (General Electric)
Appliance TypeWasher
Primary FunctionSenses washer tub air pressure to regulate the water level and signal when filling should stop.

Installation Notes

  • Disconnect electrical power before service.
  • Verify the replacement part number against the washer model before installation because similar-looking switches may differ.
  • Reconnect the pressure hose and wiring connector securely and inspect both for damage before reassembly.
  • After installation, run an appropriate fill operation while monitoring for normal water-level control and leaks.

Verified Compatible Models

GCSR2090H0WW, GCSR2090H2WW, GCSR2090H3WW, GFSR3110H0WW, GFSR3110H1WW, GHDSR209H0WW, GHDSR209H2WW, GHDSR209H3WW, GIWP1000M0WW, GJSR2080H0WW, GJSR2080H2WW, GJSR2080H3WW, GKSR3140H0WW, GKSR3140H1WW, GNSR2090T9WW, GNSR3150H0WW, GNSR3150H1WW, HNSR3110H0WW, S1070A0WW, S1070A1WW, S1070A2WW, S1070A4WW, S1070A5WW, S2000D0WW, S2000D2WW, S2000D5WW, S2100E1WW, S2100E4WW, S2100E6WW, S2100E7WW, S2100G0WW, S2100G2WW, S2100G3WW, S2200Y0WW, S2200Y1WW, S2200Y3WW, S3500B0WW, S3600D0WW, S3600D5WW, S3700E0WW, S3700E1WW, S3700E4WW, S3700E6WW, S3700G0WW, S3700G1WW, VBSR2080W0AA, VBSR2080W0WW, VBSR2080W1AA, VBSR2080W1WW, VBSR3100B0WW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

What Customers Say

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps