GE Washer U Shape Drain Hose WG04F04381, Replaces WH41X10133

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drain hose slips out of the standpipe or sink
• Improper hose routing that can contribute to siphoning or backflow
• Leakage if the hose or its connection is cracked, loose, or displaced
• Poor or incomplete draining when the hose is kinked or obstructed

Check Before Replacing

• With the washer unplugged, visually confirm that the U-shaped guide is present and attached at the drain-hose end.
• Check that the drain hose follows a smooth U-shaped route without sharp kinks or crushing.
• Confirm that the hose remains securely positioned in the standpipe or sink and has not slipped down or out.
• Inspect the guide and nearby hose connections for visible cracks, splits, looseness, or water residue.
• If drainage is abnormal, inspect the hose path for visible blockage or compression before replacing the guide or hose.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing the washer.
• Attach the U-shaped guide to the drain-hose end as shown in the applicable GE installation documentation.
• Secure the hose and guide against displacement using the retention method specified for the washer installation.
• Do not force the hose into a sharp bend or route it so deeply into the standpipe that siphoning may occur.
• Verify that the hose is not kinked and that the drain connection is secure before operating the washer.

Verified Compatible Models

GCVH6500K1WW, GCVH6800J1MR, GCVH6800J2MS, GFAN1000L1WW, GFAN1000L2WW, GFAN1000L3WW, GFW400SCK0WW, GFW450SSK0WW, GFWH1200D0WW, GFWN1100H0WW, GFWN1100H1WW, GFWS1500D0WW, GFWS1700H1WW, GFWS3500L0WW, GFWH1200D1WW, GFWH1200H0WW, GFWN1300J0WW, GFWN1300J1WW, GFWS1705H0DG, GFWS1705H1DG, WBVH5200J0WW, WCVH6800J1MS, WCVH6800J2MS, WPDH8800J0MV, WPDH8800J3MV

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.