GE Washer Electronic Control Board / Control Board Assembly WG04F04570, Replaces WH12X10443

Is This the Right Part?

✅ Cross Reference Information

WH12X10443

Common Symptoms

• Control panel does not respond to selections, Washer will not start or fails to respond to the Start command, Cycle operation stops or does not complete, Displayed error codes or abnormal control behavior, Washer remains stuck in one control state

Check Before Replacing

• Disconnect the washer from electrical power before opening or servicing it.
• Confirm the power cord is firmly connected and the household circuit, fuse, or breaker is functioning.
• With power disconnected, inspect the control-board harnesses and connectors for loose wires, corrosion, damaged terminals, or incomplete insertion.
• Verify that the washer’s door closes and latches correctly before attributing a no-start condition to the control board.
• Use the model-specific service-mode tests or error-code history, when available, to distinguish control symptoms from door-lock, water-supply, drain, sensor, or wiring problems.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing., Use electrostatic-discharge precautions when handling the electronic control assembly., Document connector locations before removal and reconnect each harness to its original location., Inspect connectors and wiring during installation; do not install a replacement board with visibly damaged or corroded connections., Reinstall all removed panels, grounding components, and protective parts before operating the washer., Follow the service procedure for the exact washer model; professional installation is recommended for electronic-control repairs.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.