When your GE dishwasher stops cleaning effectively — dishes come out dirty, water isn't circulating through the spray arms, or the machine runs but nothing gets clean — the circulation pump and motor assembly is the primary suspect. The WG04F05516 is the direct OEM replacement that restores full water pressure and circulation, so every cycle delivers the thorough, consistent clean your dishwasher was designed to provide.

✓ Model-Specific Repair Pages

Don't see your model? Contact us and we'll confirm compatibility before you order.

✓ Common Symptoms Fixed

This circulation pump and motor assembly addresses the most common failure modes in affected GE dishwashers: dishes not getting clean despite running full cycles, no water spraying from the spray arms during wash, dishwasher running but making unusual humming or grinding noises, standing water remaining in the tub after the cycle, error codes related to water circulation or wash motor failure, and reduced water pressure to upper and lower spray arms.

✓ Key Features & Specifications

Part Number: WG04F05516
Replaces: WD12M00132
Part Type: Dishwasher Circulation Pump & Motor Assembly
Brand: GE
Fit Type: OEM Direct Replacement
Function: Circulates water through the spray arms during wash and rinse cycles
Construction: Built to OEM specifications for continuous hot water and detergent exposure
Weight: 10 lbs

✓ Buying Options

New / OEM — The genuine GE WG04F05516 circulation pump and motor assembly, sourced to OEM specifications. Exact fit, mounting points, and electrical connections as the original. Best choice for guaranteed performance and long-term reliability.

Used / Tested — A pull from a working unit, tested for function. Ideal when cost is the priority and you're comfortable with a used component. Sold as-is with no warranty implied.

These aftermarket replacement parts are not affiliated with, sponsored by, or endorsed by GE or any OEM manufacturer.

✓ Replacement Part Numbers

WG04F05516 (OEM) | WD12M00132 (superseded OEM) | WG04F05516XP (aftermarket cross-reference)

✓ Compatible Models

GDF410SGF0BB, GDF410SGF0WW, GDF410SGF1BB, GDF410SGF1WW, GDF410SSF0SS, GDF410SSF1SS, GDT410SIF0II, GDT410SIF1II, GDT690SGF0WW, GDT690SGF1WW, GDT696SSF0SS, GDT696SSF1SS, GDWF400V01BB, GDWF400V01WW, GDWF460V01SS, GPF400SGF00WW, GPF400SGF0WW, GPF400SGF1WW, MDF400SGF0WW, MDF400SGF1WW

✓ Installation Tips

Always disconnect power and turn off the water supply before starting. Pull the dishwasher out from the cabinet for access to the pump assembly underneath. Photograph all wiring harness connections before disconnecting. Remove the lower spray arm, filter assembly, and sump cover to access the pump. Disconnect the wiring harness and water inlet/outlet hoses from the old pump. Install the new WG04F05516 in the same orientation, reconnect all hoses and harness connectors, and ensure all clamps are secure. Run a short test cycle to verify water circulation and check for leaks before pushing the unit back into the cabinet.