GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)
GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)
GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)
GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)
GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)
GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)
Customers rate us 4.8/5 based on 236 reviews.

GE Washer Drain Pump WG04F10241 – OEM Replacement (Replaces WG04F12336, WG04F02348, WG04F07916)

$279.99

XPart Verified Replacement  |  SKU 9665313112353

Condition: OEM

Product variant with selected options does not exist!

Frequently Bought Together

GE Washer Drain Pump WG04F10241

Genuine OEM | Replaces WG04F12336 | GE, Hotpoint & Kenmore Washers

The WG04F10241 is the genuine OEM drain pump for select GE, Hotpoint, and Kenmore front-load and top-load washers. The drain pump is the motor-driven component that evacuates water from the tub after each wash, rinse, and spin phase — moving 15–20 gallons per cycle. When it fails, water stays in the drum, the spin cycle won't engage, and drain error codes appear. This part directly replaces WG04F12336 and is a quick 15–30 minute DIY repair.

⚠️ Pro tip: Before replacing the pump, always check the pump filter/trap for clogs — coins, buttons, and debris are the most common cause of drain issues and take 2 minutes to clear.

✓ Model-Specific Repair Pages

GFWS1705H1DG GFWS1705H0DG GFWS1700H1WW GFWS1700H0WW GFWN1100H1WW
GFWN1100H0WWGFWH1200H0WW

Don’t see your model? Contact us and we’ll confirm compatibility.

The pump motor drives an impeller that creates suction, pulling water from the tub and forcing it out through the drain hose. Common failure modes include motor burnout (silent, no draining), seized impeller (hums but won’t spin), worn impeller fins (drains slowly), bearing failure (grinding noise), and intermittent failure when hot.

✓ Common Symptoms Fixed

Washer won’t drain, standing water in drum after cycle, humming or buzzing with no water movement, slow draining, spin cycle won’t engage, water leaking from pump area, and drain error codes on the display.

✓ Key Features & Specifications

Genuine OEM part number WG04F10241. Direct replacement for WG04F12336. Compatible with GE, Hotpoint, and Kenmore front-load and top-load washers. Manufactured to original factory specifications for guaranteed fit and performance.

✓ Buying Options

OEM New (WG04F10241): The genuine factory original drain pump. Full manufacturer-spec performance and guaranteed fit.

Used / Tested Good: A pull from a working machine, tested prior to listing. Ideal for budget-conscious repairs where a used part is acceptable.

✓ Replacement Part Numbers

WG04F10241 replaces: WG04F12336, WG04F10001, WG04F02348, WG04F07916, WH23X10026, WH23X10028, WH23X10038, WH23X25518, WH11X34740, WH23X25461, WH23X20825

✓ Installation Tips

Unplug the washer and shut off water supply before beginning. Access the pump by removing the front lower panel or tilting the machine back depending on model. Disconnect the drain hose and wiring harness, remove the mounting screws, and swap in the new pump. Reconnect all connections, restore power, and run a drain/spin cycle to confirm proper operation.

✅Compatibility & Cross Reference

Part number WG04F10241 replaces WG04F10001, WG04F02348, WG04F07916, WH23X10026, WH23X10028, WH23X10038, WH23X25518, WH11X34740, WH23X25461, WH23X20825, WH23X10038, WG04F12336

GFWH1200H0WW, GFWH1200H0WW, GFWH1200H0WW, GFWH1200H0WW, GFWN1100H0WW, GFWN1100H0WW, GFWN1100H0WW, GFWN1100H0WW, GFWN1100H1WW, GFWN1100H1WW, GFWN1100H1WW, GFWN1100H1WW, GFWS1700H0WW, GFWS1700H0WW, GFWS1700H0WW, GFWS1700H0WW, GFWS1700H1WW, GFWS1700H1WW, GFWS1700H1WW, GFWS1700H1WW, GFWS1705H0DG, GFWS1705H0DG, GFWS1705H0DG, GFWS1705H0DG, GFWS1705H1DG, GFWS1705H1DG, GFWS1705H1DG, GFWS1705H1DG,

How do I know if my washer drain pump is bad or just clogged?

Start by checking for a clog before assuming the pump has failed. If your GE washer has a pump filter access panel (small door at the bottom front), open it, drain the water into a shallow pan, and pull out the filter. Remove any coins, buttons, hair pins, lint, or debris. Reinstall the filter and run a test cycle — this fixes drain issues about 60–70% of the time. If there's no filter access, listen when the washer tries to drain. A pump that hums or buzzes but doesn't drain usually has a foreign object jammed in the impeller — the motor is trying to spin but the impeller is physically blocked. This is a clog, not a motor failure. You'll need to access the pump, disconnect the inlet hose, and check inside the pump housing for debris. If the pump is completely silent when the washer should be draining (no hum, no buzz, nothing), the motor has burned out — the pump needs replacement. If the pump makes a loud grinding noise, the bearings have failed — the pump needs replacement. If you've cleared all debris, the drain hose is clear and not kinked, and the pump still won't drain or makes grinding noises, replace the pump.

GE (General Electric)

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

What our customers are saying 😍

4.83 ★ (236)
Verified

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps