GE (General Electric) Washer Drain Pump WG04F10638, Replaces 24000956, WD-5470-22, WH23X26327

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water remains in the washer after the drain or spin cycle.
• Little or no water exits through the drain hose.
• Unusual humming, grinding, or other pump-area noise during draining.
• Water leakage from the pump area.
• Washer may not advance to spin when water cannot be removed.

Check Before Replacing

• Confirm the washer has completed any normal cycle pause before assuming a fault.
• With the washer unplugged, inspect the external drain hose for kinks, crushing, or blockage.
• Check the household standpipe or drain for blockage using the appliance manufacturer's instructions; do not proceed if the plumbing itself will not accept water.
• If the washer has an accessible pump filter, inspect and clean it according to the model's owner manual, allowing for residual water.
• During a drain cycle, observe whether water flow is weak and listen for abnormal pump noise; these observations do not by themselves prove pump failure.
• If electrical testing is required, use the model-specific service documentation or a qualified technician rather than testing energized wiring without the proper procedure.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing the washer.
• Shut off water supply and manage residual water in the tub, hoses, and pump area before removing the existing pump.
• Use the washer model's service or repair instructions for access, hose routing, electrical-connector placement, and fastener details; these can vary by model.
• After installation, verify that hoses and electrical connectors are fully seated and that the pump area is free of leaks before returning the washer to normal use.

Verified Compatible Models

GFW148SSL0WW, HLC1700AXS, HLC1700AXW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.