GE Dishwasher Drain Hose Assembly WG04F11038, Replaces 12676000000138

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher will not drain
• Dishwasher drains too slowly
• Water leakage from the drain-hose path

Check Before Replacing

• With power disconnected, visually inspect the accessible drain-hose routing under the sink and behind the dishwasher for kinks, crushing, or visible damage.
• Check the hose connection at the sink drain, disposer, or air gap for blockage or leakage; do not place hands inside a disposer.
• If no air gap is installed, verify that the hose forms the required high loop according to the dishwasher installation instructions.
• Check whether the sink drain or air gap is obstructed before attributing the symptom to the hose.
• If the hose must be detached, place a container and towels under the connection because residual water may drain out.

Pro Tip

Part Details

Installation Notes

• Route the replacement hose without kinks, crushing, or sharp bends.
• Connect it using the model-specific sink, disposer, or air-gap arrangement shown in the installation instructions.
• Where no air gap is used, maintain the specified high-loop routing to help prevent wastewater backflow.
• Confirm the hose connection is secure and leak-free before returning the dishwasher to normal operation.
• Use the exact model installation instructions and verify the part number before installation; hose dimensions and connection details can vary by model.

Verified Compatible Models

GBT632SGM0WW, GBT632SSM0SS, GBT632SSMSS, MBF422SGM0WW, GBF532SSP0SS, GBT632SSMSSEC, GLV1890XSS0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.