SLOW OR INCOMPLETE DRAINING
General Electric (GE) Dishwasher drain hose WG04F11051, Fixes Slow or incomplete draining
OEM dishwasher drain hose, also described by one retailer as an inner drain hose. The part is listed for portable GE dishwashers and appears as drain-hose item 401 in parts diagrams.
Part WG04F11051Replaces 12676000000955General Electric (GE)
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWG04F11051
Replaces12676000000955
ManufacturerGeneral Electric (GE)
Appliance TypeDishwasher
Part TypeDishwasher drain hose
✅ Cross Reference Information
Current Part NumberWG04F11051
Replaces12676000000955
Common Symptoms
- Water remaining in the dishwasher after a cycle
- Dirty water or odor returning between cycles from drain-hose backflow
- Water leakage at the drain-hose connection
- Drainage problems when the hose is kinked, blocked, or improperly routed
Check Before Replacing
- Visually inspect the accessible drain hose for kinks, crushing, cracking, or water leakage.
- Check the hose connections and clamps for looseness or visible leakage without disassembling the dishwasher.
- If the dishwasher uses an air gap, inspect the air-gap hose path for blockage; if it does not, verify that the drain hose has the model-required high loop.
- Check the connected sink drain or disposer inlet for an external clog; do not place hands into a disposer.
- If the hose is connected to a disposer, confirm the dishwasher drain connection is open and not obstructed.
Pro Tip
A drain hose problem can resemble a pump or plumbing problem; first check for kinks, connection leaks, and improper high-loop or air-gap routing before replacing other components.
Part Details
Part NumberWG04F11051
Part TypeDishwasher drain hose
ManufacturerGeneral Electric (GE)
Appliance TypeDishwasher
Primary FunctionRoutes wastewater from the GE dishwasher to the household drain connection.
Installation Notes
- Use the replacement hose only with models whose parts documentation specifies WG04F11051.
- Route the replacement along the original hose path and preserve the required high-loop or air-gap arrangement for the specific dishwasher installation.
- Inspect and reuse or replace connection clamps only as specified by the model’s installation or service documentation; do not operate the dishwasher if a connection leaks.
- Disconnect appliance power and water supplies according to the model’s service instructions before accessing internal hose connections.
Verified Compatible Models
PBT650SML0ES, PBT660SSL0SS, PBT860SSM0SS, DBP655SST0SS, GBF655SGP0WW, GBF655SMP0ES, GBF655SSP0SS, GBP655SMP0ES, GBP655SSP0SS, GBP655SSPSS, GBT640SGP0WW, GBT640SMP0ES, GBT640SSP0SS, GLV1890XSS0, PBF665SMP0ES, PBF665SSP0FS, PBP665SGP0WW, PBP665SGPWW, PBP665SSP0FS, PBT860SMM0ES, PBT865SMP0ES, PBT865SMPES, PBT865SSP0FS, PBT865SSPFS, PDT660SSF0SS
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
