GE Dishwasher White Control Panel Assembly WG04F12379, Replaces 265D4318G005, WD34X28027 – Superseded by WD34X28027

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Cracked, faded, or worn control-panel surface
• Some buttons or cycle selections fail to respond
• Display or control functions are intermittent while the dishwasher otherwise has power
• Controls remain unresponsive after confirming the dishwasher has electrical power

Check Before Replacing

• Disconnect electrical power at the circuit breaker before opening or handling the door/control-panel area.
• Visually inspect the panel for cracks, fading, worn markings, physical damage, or signs of moisture intrusion.
• With power restored only for a brief functional check, verify whether the display operates and whether individual buttons respond consistently.
• If access is required, disconnect power again and inspect that the control-panel wiring connector is fully seated and undamaged.
• Do not condemn the control panel solely from a no-operation symptom; also verify the dishwasher’s power supply and consider the electronic control board and wiring.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power at the circuit breaker before removing the dishwasher door/control-panel area.
• The panel is accessed from the inner side of the dishwasher door; retain and reinstall the original fasteners appropriate to the appliance model.
• Before disconnecting wiring, note connector orientation and release any locking tab rather than pulling on the wires.
• Reconnect all control-panel wiring fully before reinstalling the inner door panel.
• After reassembly, restore power and test the display and control buttons.

Verified Compatible Models

GDF510PGR0WW, GDF510PGR1WW, GDF510PGR3WW, GDF510PGR5WW, GDF510PGR6WW, GDF511PGR0WW, GDF511PGR1WW, GDF511PGR3WW, GDF511PGR5WW, GDF511PGR6WW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.