GE / General Electric Dishwasher door gasket (tub gasket / door seal) WG04L06024, Replaces 265D2781P003, WD08X23476, WD08X10088

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water leakage around the door during operation
• Dishwasher door may not close properly when the gasket is damaged, swollen, or incorrectly seated

Check Before Replacing

• With the dishwasher empty and the door open, visually inspect the gasket for tears, cuts, deformation, or excessive wear.
• Check that the gasket is seated evenly in its intended groove and is not pulled out or folded.
• Inspect the door and tub contact area for debris or obstructions that could prevent even gasket contact.
• If the gasket ends do not meet at the bottom on the applicable model, do not treat the designed gap as a defect; GE notes that some models have an approximately three-inch gap by design.

Pro Tip

Part Details

Installation Notes

• Remove the old gasket and seat the replacement into the dishwasher’s appropriate gasket grooves.
• Press the gasket fully and evenly into place around the tub; GE notes that seating may require more than one attempt.
• Inspect the completed installation for even distribution on both sides before operating the dishwasher.
• Verify the appliance model and gasket configuration before installation because gasket shape and end configuration can vary by model.

Verified Compatible Models

GDF510PSD4SS, GDF520PSF4SS, GDF540HGD2WW, GDT650SSF0SS, GDF510PGJ6WW, GDF510PGM4WW, GDF510PGR0WW, GDF510PGR3WW, GDF510PGR5WW, GDF510PGR6WW, GDF510PSJ6SS, GDF510PSM4SS, GDF510PSR0SS, GDF510PSR3SS, GDF511PGR0BB, GDF511PGR0WW, GDF511PGR1WW, GDF511PGR3BB, GDF511PGR3WW, GDF511PGR5WW, GDF511PGR6WW, GDF511PSR0SS, GDF511PSR3SS, GDP630PGR0WW, GDP630PGR6WW, GDP630PYR0FS, GDT545PGJ6BB, GDT605PGM4WW, GDT605PGM5WW, GDT605PGM6BB, GDT605PGM6WW, GDT605PSM4SS, GDT605PSM6SS, GDT635HMM4ES, GDT635HMM5ES, GDT635HSJ6SS, GDT635HSM4SS, GDT635HSM5SS, GDT635HSM6SS, GDT635HSR0SS, GDT635HSR3SS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.