If your GE top-load washer refuses to start, stops mid-cycle, or has a lid that won't close or latch properly, the lid assembly is the most likely culprit. Part number WG04A05186 is the current OEM replacement for the earlier WH10X35297 — a complete lid assembly that includes the lid panel, hinge hardware, and integrated lid switch components. This is a direct factory-spec replacement that restores proper lid closure, safety interlock function, and normal wash cycle operation.

✓ Model-Specific Repair Pages

No matching GE top-load washer model hub pages found yet for this part. Contact us with your model number and we'll confirm compatibility.

The WG04A05186 lid assembly is a large structural component that covers the top of your GE top-load washer drum. It serves two critical functions: physically enclosing the drum during operation to prevent water spray and clothing ejection, and housing the lid switch that signals the control board when the lid is safely closed. When the lid assembly cracks, warps, or the integrated switch fails, the washer's safety circuit prevents the motor from running — leaving you with a machine that won't agitate, spin, or complete a cycle. WG04A05186 supersedes WH10X35297 and is the active OEM part number for this application.

✓ Common Symptoms Fixed

• Washer won't start or respond when the start button is pressed
• Lid won't close, latch, or stay closed during operation
• Washer stops mid-cycle and won't resume
• Washer fills with water but won't agitate or spin
• Lid cracked, broken, or physically damaged
• Lid hinge broken or lid sitting unevenly on the cabinet

✓ Key Features & Specifications

• OEM part number: WG04A05186
• Replaces: WH10X35297
• Compatible brand: GE
• Appliance type: Top-load washer
• Component: Complete lid assembly (lid panel, hinges, lid switch)
• Shipping weight: 25 lbs
• Province of origin: Ontario

✓ Buying Options

OEM / New — Genuine GE original equipment manufacturer part. Identical to the factory-installed lid assembly. Meets all original structural and electrical specifications. Best choice when you need a guaranteed factory-spec replacement that preserves your washer's safety interlock system.

✓ Replacement Part Numbers

WG04A05186 (OEM) | WH10X35297 (superseded — replaced by WG04A05186)

✓ Installation Tips

• Unplug the washer before beginning any repair work
• The lid assembly is typically secured by hinge pins or screws at the rear of the washer cabinet — location varies by model
• Open the old lid fully and support it before removing hinge fasteners to prevent it from falling
• Disconnect the lid switch wire harness before fully removing the old assembly
• Transfer any wire harness connectors to the new WG04A05186 assembly before installing
• Seat the new lid onto the hinge mounts, secure fasteners, and reconnect the harness
• Restore power and run a test cycle to confirm the lid switch is functioning and the washer starts normally
• Note: due to the 25 lb shipping weight, having a second person assist with handling is recommended

✓ Compatible Models

WG04A05186 is compatible with select GE top-load washer models. Please verify your model number on the rating plate (typically inside the lid frame or on the back of the unit) before ordering. Contact us with your model number for compatibility confirmation.

✓ Frequently Asked Questions

Is WG04A05186 the same as WH10X35297?
Yes — WG04A05186 is the current OEM superseding part number for WH10X35297. It is a direct drop-in replacement for the same application.

Why won't my GE washer start after the lid is closed?
The most common cause is a failed lid switch inside the lid assembly. The washer's control board requires a signal from the lid switch confirming the lid is closed before allowing the motor to run. If the switch is faulty or the lid doesn't close fully, the washer won't start. Replacing the full lid assembly (WG04A05186) resolves both the physical closure issue and the switch failure in one repair. Contact us if you need help diagnosing before ordering.

Does this lid assembly include the lid switch?
Yes — WG04A05186 is a complete lid assembly that includes the integrated lid switch. No separate switch purchase is required.

How long does installation take?
Most homeowners complete this repair in 30–45 minutes. Basic hand tools are required. Due to the size and weight of the assembly, having a helper is recommended.

Is this part eligible for free shipping?
Please check the product listing or contact us for current shipping rates on this item. Due to its 25 lb weight, shipping costs may apply.