GE Appliances / General Electric Washer Dispenser Drawer with Microban® WH42X29535

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Detergent or fabric softener remains in the dispenser or does not dispense properly.
• Visible cracking, wear, or damage at the dispenser drawer.
• Water or laundry-product leakage around the dispenser-drawer area.

Check Before Replacing

• With the washer off, confirm the drawer is fully closed and inspect it for cracks, deformation, or other visible damage.
• Remove the drawer using the model-appropriate release/lock tab and rinse away detergent or softener buildup; clean residue from the drawer recess without attempting to remove the dispenser box.
• Verify any removable siphon caps/inserts are fully seated after cleaning.
• If detergent or fabric softener still does not dispense after the drawer has been cleaned, arrange washer service rather than assuming the drawer alone is defective.

Pro Tip

Part Details

Installation Notes

• Verify the washer model accepts WH42X29535 before installation.
• For applicable GFW650-series washer configurations, pull the existing drawer out until it stops, use the rear drawer-cavity lock tab to release it, and withdraw the drawer.
• Clean accumulated laundry-product residue from the drawer and recess before fitting the replacement drawer.
• Do not attempt to remove the fixed dispenser box solely for cleaning; use the washer model’s owner instructions if drawer-release details differ.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.