GE / General Electric Washer agitator drive bell coupling kit WH49X10042, Replaces 175D2846P001, WH02X10037, WH02X1200, WH2X10037, WH2X1200, WH43X0137, WH43X10009, WH43X137

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Agitator moves weakly or slips
• Grinding or unusual mechanical noise during agitation
• Agitator feels loose or turns freely when it should be engaged
• Washer may agitate poorly and leave clothes inadequately washed

Check Before Replacing

• Disconnect power before inspection.
• With the washer empty and powered off, check whether the agitator is unusually loose or turns freely relative to the transmission shaft.
• If accessible for the specific washer model, remove the agitator and visually inspect the coupling splines for rounding, stripping, cracking, or excessive wear.
• Inspect the transmission-shaft splines and the agitator mating splines for rust, debris, damage, or abnormal wear; do not force removal or operation.
• Confirm that the symptom is not caused by a loose or damaged agitator, belt, transmission, or other drive component before replacing the coupling.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing.
• The agitator must be removed to access the coupling on applicable designs.
• Remove the coupling retaining bolt, lift the old coupling from the transmission shaft, and install the replacement coupling without forcing it.
• Inspect the shaft and agitator splines before installation; damaged mating components may prevent proper engagement.
• Use the supplied replacement bolt and gasket where provided, then reinstall the agitator and verify secure engagement before testing.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.