Dryer Won’t Stack Safely on Washer? Stacking Kit 8572546 – Fix Unstable Laundry Stack Fast

A dryer that isn’t properly secured to the washer below it is a tipping hazard — and the only safe fix is the correct OEM stacking kit. In most Whirlpool, KitchenAid, and Inglis laundry pairs, an unstable or improperly stacked dryer is caused by a missing or incorrect stacking kit. When it’s absent, the dryer can shift, vibrate off the washer during spin cycles, or tip forward when the door is opened. ⚡ The most common laundry room safety oversight when converting from side-by-side to stacked configuration. Part 8572546 is the genuine OEM stacking kit that securely mounts your dryer on top of your compatible Whirlpool, KitchenAid, or Inglis washer with no modifications required.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ You are stacking a compatible Whirlpool, KitchenAid, or Inglis dryer on top of a matching front-load washer
• ✔ Your washer and dryer are the same brand family and compatible dimensions (27" units)
• ✔ The dryer is currently sitting unsecured on top of the washer, or the old kit is broken/missing
• ✔ ONLY issue is the dryer is not secured to the washer — both appliances run normally

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Dryer vibrates or walks on top of the washer during spin cycles
• Dryer shifts forward when the door is opened
• Stacking bracket is cracked, broken, or missing entirely
• Dryer was previously side-by-side and is being converted to stacked
• Loud banging or rattling from the top of the washer during operation
• Dryer door doesn’t align properly due to unit shifting

✔ If these symptoms match, this is the correct component to restore a safe, stable stacked laundry configuration.

✔ In most cases, installing Part 8572546 eliminates movement and secures the dryer permanently to the washer below.

📦 Part Details

• Part Number: 8572546
• Type: OEM Dryer Stacking Kit — mounts dryer securely on top of compatible front-load washer
• Replaces: 285785, AP3094183, PS334230, W10869845, W10789532 — no modification required
• Brands: Whirlpool, KitchenAid, Inglis, Maytag, Kenmore

⚙️ Installation

Skill Level: Easy — 15–25 minutes. Two people recommended for lifting the dryer. Disconnect power to both appliances before beginning. Position the washer in its final location, place the stacking kit brackets on the washer top per the included instructions, then carefully lift the dryer onto the washer and secure it to the brackets. No drilling or special tools required — the kit uses the existing mounting points on both appliances.

✓ Compatible Models

Compatible with Whirlpool, KitchenAid, Inglis, Maytag, and Kenmore 27" front-load washer and dryer pairs using part 8572546 or cross-reference numbers listed above. Contact us to verify your model number before ordering.

💡 Pro Tip