FRESH-FOOD COMPARTMENT TOO WARM WHILE THE FREEZER REMAINS COLD
Whirlpool Corporation Refrigerator Damper Control Assembly WPW10248595, Fixes Fresh-food compartment too warm while the freezer remains cold
OEM air damper control assembly that regulates airflow between refrigerator compartments and may address a refrigerator that is warm while the freezer remains cold.
Part WPW10248595Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWPW10248595
ManufacturerWhirlpool Corporation
Appliance TypeRefrigerator
Part TypeDamper Control Assembly
✅ Cross Reference Information
Current Part NumberWPW10248595
Common Symptoms
- Fresh-food compartment temperature is too warm or not cold enough while freezer temperature is normal.
- Fresh-food compartment may become too cold if the damper remains open.
- Restricted or absent airflow from the damper outlet despite a properly cold freezer.
- Damper motor or flap may remain stuck open or closed, subject to model-specific control behavior.
Check Before Replacing
- Confirm that the freezer is producing cold air and that the fresh-food compartment has restricted or absent airflow at the damper outlet.
- With power disconnected, visually inspect the damper opening and surrounding air passage for ice, packaging, or other obstructions; do not force the flap.
- Check the damper assembly and connector for visible physical damage, corrosion, or loose wiring after accessing the component according to the appliance’s service documentation.
- If the refrigerator provides a manufacturer-specified diagnostic mode, use the model’s tech sheet to command or observe the damper; do not apply external power or bypass controls.
- Before condemning the assembly, consider that the main control and thermistor determine damper operation; a damper symptom does not by itself prove the assembly is defective.
Pro Tip
The main control operates the damper based on the thermistor’s resistance reading, so verify the airflow complaint and inspect the related sensor and wiring before replacing the damper assembly.
Part Details
Part NumberWPW10248595
Part TypeDamper Control Assembly
ManufacturerWhirlpool Corporation
Appliance TypeRefrigerator
Primary FunctionRegulates cold-air flow from the freezer into the refrigerator/fresh-food compartment.
Installation Notes
- Disconnect electrical power before servicing or installing the assembly.
- Access location and disassembly requirements vary by refrigerator model; some applications require access around or removal of the ice-maker assembly.
- Photograph or label the connector and wire routing before disconnecting the old assembly.
- Install the replacement in the same orientation and reconnect the wiring exactly as documented for the appliance model.
- Do not force the damper flap or apply external power unless the model-specific service documentation explicitly directs it.
- Restore power and verify airflow and compartment temperatures after reassembly.
Verified Compatible Models
7MF2976AEM00, 7MF2976AEM01, 59672382410, 59672382411, 59672382413, 59672383410, 59672383411, 59672383412, 59672383413, 59672389410, 59672389411, 59672389412, 59672389413, 596723824102, 596723834102
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
