Refrigerator Not Staying Cold? Door Gasket W11456682 – Stop Cold Air Leaks Fast

If your refrigerator is running constantly, sweating around the door, or struggling to hold temperature, a failed door gasket is the most common cause. In most Whirlpool-built refrigerators, the door gasket degrades over time — cracking, warping, or losing its magnetic seal — allowing warm air to infiltrate the cabinet. When it fails, the compressor overworks, energy bills climb, and food spoils faster. ⚡ Common wear item in Whirlpool-platform refrigerators. Part W11456682 is the genuine OEM replacement gasket that restores an airtight door seal and returns the refrigerator to efficient, stable operation.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator powers on and compressor runs
• ✔ Cooling system (evaporator, condenser) confirmed functional
• ✔ Door closes fully and hinges are intact
• ✔ Temperature controls respond normally
• ✔ ONLY problem is warm air infiltration, condensation around door, or poor temperature retention

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Refrigerator running constantly or compressor cycling too frequently — most common customer complaint
• Condensation or frost forming around the door frame
• Visible cracks, tears, or gaps in the door seal
• Door gasket feels stiff, brittle, or no longer magnetic
• Interior temperature warmer than set point
• Higher than normal energy consumption

✔ If these symptoms match, this is the most likely failed component.

✔ In most cases, replacing the door gasket restores proper temperature retention immediately.

📦 Part Details

• Part Number: W11456682
• Type: Refrigerator door gasket — magnetic seal, OEM direct-fit
• Replaces: OEM direct-fit door gasket (no modification required)
• Brands: Whirlpool, Maytag, KitchenAid, Amana, Jenn-Air

⚙️ Installation

Skill Level: EASY — 20–30 minutes. Disconnect power before beginning. The gasket is retained by the inner door liner — carefully peel back the old gasket starting at a corner, then press the new gasket into the retaining channel working around the perimeter. No tools required in most models. Allow the gasket to warm to room temperature before installation for best fit.

💡 Pro Tip

Compatible model pages: Contact us with your model number to confirm fitment for your specific refrigerator.