FABRIC SOFTENER IS NOT DISPENSED
Whirlpool Washer Fabric softener dispenser W11205050, Fixes Fabric softener is not dispensed
White fabric-softener dispenser for select Whirlpool-family top-load washers; approximately 5 inches round by 4 1/4 inches tall.
Part W11205050Replaces W10863013Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11205050
ReplacesW10863013
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeFabric softener dispenser
✅ Cross Reference Information
Current Part NumberW11205050
ReplacesW10863013
Common Symptoms
- Fabric softener remains in the dispenser after the cycle.
- Fabric softener is dispensed at the wrong time or immediately after filling.
- The dispenser cup becomes loose or comes off during the spin cycle.
- Residue buildup restricts dispensing.
Check Before Replacing
- Confirm that the washer’s fabric-softener option is selected, if the model requires it.
- Inspect the cup for visible cracks, deformation, or residue buildup.
- Clean the cup with a damp cloth and verify that its dispensing openings are unobstructed; do not use a dishwasher.
- Check that the cup is seated securely on the agitator and remains retained during gentle manual inspection.
- If the cup will not stay attached, inspect the agitator’s mating area for damage before replacing additional parts.
Pro Tip
Do not overfill or dilute the dispenser. If the replacement cup will not click into place or repeatedly comes off, the agitator may also require inspection.
Part Details
Part NumberW11205050
Part TypeFabric softener dispenser
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionHolds liquid fabric softener and releases it into the washer during the appropriate rinse portion of the cycle.
Installation Notes
- Follow the washer owner’s manual for the model-specific installation procedure.
- Seat the cup on the agitator and press down until it clicks into place.
- Verify that the cup is secure before operating the washer.
- If it does not remain attached, stop installation and inspect the agitator rather than forcing the cup.
Verified Compatible Models
4KMVWC410JW0, 4KMVWC410JW1, 4KMVWC420JW0, 4KMVWC420JW1, 4KMVWC430JW0, 4KMVWC440JW0, 4KMVWC440JW1, 7MMVWC416FW0, 7MMVWC417FW0, 7MMVWC465JW0, 7MMVWC565FW0, 7MMVWC565FW1, MVWC416FW0, MVWC416FW1, MVWC465HW0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
