Whirlpool Washer Water Inlet Valve W11614515, Replaces W11528768

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer does not fill with water
• Washer fills slowly or takes too long
• Washer overfills
• Washer fills when not in use
• Washer receives water at only one temperature
• Water leaks from the inlet-valve area

Check Before Replacing

• Confirm both household water-supply valves are fully open.
• Inspect inlet hoses for kinks, blockage, corrosion, or restricted flow.
• With power disconnected and water supply shut off, inspect the valve’s inlet screens for visible sediment or mineral buildup.
• If the washer still fills slowly after adequate water pressure and unobstructed hoses are confirmed, the inlet valve may require further testing or replacement; other washer components can cause similar symptoms.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the washer’s water supply before servicing.
• Match the replacement valve to the washer’s exact model and serial number.
• Before removing the old valve, note the hose routing and electrical-connector locations.
• Transfer the hoses and electrical connections to the replacement valve in the same positions and secure the valve as specified for the appliance.
• Restore the water supply and power, then check the fill operation and all valve connections for leaks before returning the washer to regular use.

Verified Compatible Models

MVW6500MBK1, MVW6500MW1, MVW7230HC1, MVW7230HC2, MVW7230HW1, MVW7230HW2, MVW7232HC1, MVW7232HC2, MVW7232HC3, MVW7232HW1, MVW7232HW2, MVW7232HW3, WTW5100HC5, WTW5100HW5, WTW5100HW6

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.