Whirlpool Washer water inlet valve assembly WP22001274, Replaces 22001273, 22001274

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Little or no water flow on one temperature selection
• Water entering the tub when the washer is not in use
• Water leaking from the valve or hose connections
• Incorrect fill temperature caused by loss of hot- or cold-water flow

Check Before Replacing

• Unplug the washer and shut off both water supplies before inspection.
• Confirm both household water faucets are fully open and the inlet hoses are not kinked.
• Inspect and carefully clean the inlet screens at the valve hose connections; do not remove or damage the screens.
• Check for loose or visibly damaged hoses and valve connections.
• If safe electrical testing is appropriate for the specific washer, inspect valve wiring and test the valve only with power disconnected; live-voltage testing should be performed by a qualified technician.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the hot and cold water supplies before removing the valve.
• Drain or contain residual water from the inlet hoses before disconnecting them.
• Label or photograph hose and wire connections before removal so each connection is returned to its original location.
• After installation, restore the water supply gradually and inspect the valve and hose connections for leaks before normal use.

Verified Compatible Models

6329, 6349, 6359, LAT1916AAE, LAT1916ABE, LAT2914AAE, LAT2914AAL, LAT2914AAM, LAT2915AAE, LAT2915AAM, LAT2916AAE, LAT2916AAM, LAT2916ABE, LAT3914AAE, LAT3914AAL

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.