Whirlpool Washer Drain pump assembly / remote-style pump with motor WP22003059, Replaces 22001982, 22002550, 22002794, 22002939, 22003059

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Slow or incomplete draining
• Unusual humming or noisy pump operation during drain
• Water leaking from the pump housing or hose connections
• Pump runs but little or no water is discharged

Check Before Replacing

• Disconnect power before servicing and close the washer's water supplies.
• Check the drain hose for kinks, blockage, or improper routing.
• Inspect accessible pump hoses and the pump inlet for foreign objects or accumulated debris; do not disassemble the pump while energized.
• Check that the pump's electrical connector is fully seated and that wiring is not visibly damaged.
• If the washer still will not drain after external hose and obstruction checks, verify the appliance-specific service procedure before condemning the pump, since a control, wiring, or drain-path fault can produce similar symptoms.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before installation and turn off the washer's water supplies.
• Drain or otherwise control residual water before disconnecting pump hoses.
• Access requirements vary by washer model; the repair may require removing a rear or lower access panel.
• Disconnect the pump wiring and hoses carefully, noting hose and connector positions before removal.
• Inspect hose connections and the pump inlet for debris during replacement, then restore all connections and panels before operating the washer.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.