Whirlpool Dryer drive motor assembly with pulley WP2200376, Replaces 2200376, 2200219, 40035201, 40048501, 40099801, MC-2200376, SQ-D511629P, 501211, 502368, 502368P

Genuine Whirlpool dryer drum-drive motor assembly. The motor includes the belt pulley and a threaded shaft for the blower wheel. Documented specifications include 120 volts, 60 Hz, approximately 5.5 amps, 1/3 horsepower, and 1725 RPM. It is used in some gas and electric dryers.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dryer hums but the drum does not start turning.
• Dryer stops turning during a cycle.
• Dryer will not start or will not turn at all.
• Motor may trip the circuit breaker when starting.

Check Before Replacing

• Disconnect power before inspection or service.
• With power disconnected, check whether the drum rotates reasonably freely by hand; excessive resistance can indicate a separate drum-support, idler, belt, or blower obstruction issue.
• Inspect the drive belt and motor pulley for visible damage, separation, or slipping.
• Visually inspect the motor wiring harness and connector for looseness, scorching, or damage.
• If the motor hums, stops after warming, or trips the breaker, rule out belt, idler, drum, blower-wheel, door-switch, and electrical-supply problems before condemning the motor.

Pro Tip

Part Details

Key Features

• Whirlpool OEM dryer drum-drive motor assembly.
• Integrated belt pulley.
• Threaded shaft for the blower wheel.
• Used in some gas and electric dryers.
• Documented electrical specifications include 120 volts, 60 Hz, approximately 5.5 amps, approximately 1/3 horsepower, and 1725 RPM.

Installation Notes

• Disconnect the dryer from electrical power before installation.
• The repair requires access to the motor, belt, blower wheel, and motor wiring harness; follow the appliance-specific service instructions.
• Record wire locations before disconnecting the motor harness.
• Remove and reinstall the blower wheel using the correct shaft orientation and ensure it is secure.
• Reinstall the motor retaining hardware and route the belt correctly around the motor pulley and idler before reassembling the cabinet.
• After reassembly, confirm that the drum turns freely and that no wires are pinched before restoring power.

Verified Compatible Models

ALE230RAW, ALE230RCW, ALE331RAC, ALE331RAW, ALE331RCW, ALE443RAC, ALE443RAW, ALE443RCW, ALE643RBC, ALE643RBW, ALE643RCW, ALE866SBC, ALE866SBW, ALE866SCW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.