Whirlpool Refrigerator Water Inlet Valve Assembly WP2307650, Replaces 2307650, W10281564

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Ice maker does not fill or stops producing ice
• Water dispenser does not dispense or has reduced flow
• Water leaks into the ice maker between fill cycles or the ice maker overfills
• Water leakage from the valve or its connections
• Valve hums or buzzes while little or no water flows

Check Before Replacing

• Confirm the household water supply is turned on and the refrigerator’s water line is not kinked.
• Check for visible leakage, mineral buildup, or loose tubing and electrical connections around the valve.
• Verify that household water pressure is adequate; Repair Clinic identifies approximately 20 psi as the minimum needed for the valve to shut off properly.
• If the ice maker is overflowing, inspect the fill tube for ice blockage and check whether water continues entering after the fill cycle ends.
• Use the refrigerator’s model-specific service diagnostics only as directed by the appliance documentation; do not perform live-voltage testing unless qualified.

Pro Tip

Part Details

Installation Notes

• Disconnect refrigerator power and shut off the household water supply before servicing.
• Relieve line pressure and protect the floor from residual water before disconnecting tubing.
• Transfer tubing and electrical connectors one at a time so each connection returns to the corresponding port.
• After installation, restore the water supply and power, then inspect all connections for leaks and verify a fill or dispensing operation.

Verified Compatible Models

JB36CXFXLB00, JB36CXFXRB00, JB36NXFXLW00, JB36NXFXLW01, JB36NXFXLW02, JB36NXFXLW03, JB36NXFXLW04, JB36NXFXLW05, JB36NXFXRW00, JB36NXFXRW01, JB36NXFXRW02, JB36NXFXRW03, JB36NXFXRW04, JB36NXFXRW05, JB36SEFXLB00, KSSS48FMXO3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.