DRYER WILL NOT START OR MAY HAVE NO HEAT WHEN THE FUSE HAS OPENED
Whirlpool Corporation Dryer Thermal fuse / thermal cut-off WP306604, Fixes Dryer will not start or may have no heat when the fuse has opened
183°F (84°C) thermal fuse or thermal cut-off mounted on the blower housing. The fuse interrupts power when the dryer overheats and may prevent the dryer from starting or heating.
Part WP306604Replaces 306604, 3-6604Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP306604
Replaces306604, 3-6604
ManufacturerWhirlpool Corporation
Appliance TypeDryer
Part TypeThermal fuse / thermal cut-off
✅ Cross Reference Information
Current Part NumberWP306604
Replaces306604, 3-6604
Common Symptoms
- Dryer will not start
- Dryer has no heat or insufficient heat
- Dryer may stop operating after overheating
Check Before Replacing
- Disconnect electrical power before servicing or testing.
- With power disconnected and the fuse wires removed, check the fuse for continuity with a multimeter; a good fuse should show continuity, while an open fuse should be replaced.
- Inspect the lint filter, exhaust duct, and blower area for lint buildup or airflow restriction before installing a replacement.
- Check that the blower wheel can turn freely and is not damaged or obstructed.
Pro Tip
A blown blower-housing thermal fuse can indicate restricted exhaust airflow or a blower-wheel problem; correct the underlying airflow or mechanical issue before replacing the fuse.
Part Details
Part NumberWP306604
Part TypeThermal fuse / thermal cut-off
ManufacturerWhirlpool Corporation
Appliance TypeDryer
Primary FunctionA one-time thermal safety fuse that interrupts the dryer circuit when the blower-housing temperature reaches approximately 183°F (84°C), helping protect the dryer from overheating.
Installation Notes
- Disconnect the dryer from electrical power before installation.
- Install the replacement in the original blower-housing location and reconnect the wires as originally positioned.
- Do not bypass or jumper the thermal fuse.
- Inspect and clean restricted lint or exhaust airflow before returning the dryer to service.
Verified Compatible Models
DE24CA, DE26CS, DE212, DE512, DE5910, DE7600, DE8410, DE8500, DE9900, DG24CA, DG26CT, DG27CS, DG313, DG612, DG7800
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
