Whirlpool Corporation Washer pump-to-drain hose WP3348552, Replaces 3348552, 63172, 3359818, 3348586

Genuine Whirlpool hose that connects the washer pump to the drain-hose connector; it carries wastewater during the drain cycle. The hose is approximately 24.5 inches long according to one parts distributor.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water pooling beneath the washer while it is draining.
• Visible dripping or moisture at the pump-to-drain-hose connection path during drainage.

Check Before Replacing

• Disconnect power before inspection. Check the accessible hose body for splits, abrasions, hardening, or deformation.
• Inspect both ends of the hose for wetness, loose positioning, or an improperly seated clamp; a leak at another nearby pump or drain connection can appear similar.
• After reassembly, run a brief supervised drain cycle and observe the hose path and both connection points for leakage.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM washer hose.
• Connects the pump to the drain-hose connector.
• Designed for the washer drain-water path.

Installation Notes

• Disconnect power before servicing; turn off the washer water supply before moving or accessing the hose area.
• Have a shallow container and towels ready: residual water can remain in the pump and hose path.
• Install the hose fully at both intended connection points and ensure the original retaining clamps are correctly repositioned before operating the washer.
• Replace any removed panels before returning the washer to service.

Verified Compatible Models

3CA2781XSW0, 3LA5580XSW0, 3LA5580XSW1, 3LA5580XSW2, 3LA5581XYN0, 3LA5581XYW0, 3LA5801XXN0, 3LA5801XXW0, 4LA6300XXF0, 4LA6300XXF1, 4LA6300XXG0, 4LA6300XXG1, 4LA6300XXM0, 4LA6300XXM1, 4LA6300XXN0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.