Whirlpool Dryer High Limit Thermostat WP3391914, Replaces 3391914

Whirlpool high-limit thermostat for dryers. It is a safety thermostat that shuts off the heating element or burner if the dryer overheats.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dryer overheats
• Dryer intermittently loses heat
• Dryer takes unusually long to dry
• Dryer may stop heating after warming up

Check Before Replacing

• Disconnect electrical power before inspection or testing.
• With the dryer unplugged, inspect the thermostat terminals and wiring for loose, damaged, or heat-discolored connections.
• After isolating the thermostat from the circuit as specified by the appliance service information, check it for electrical continuity with a multimeter; an open reading when the thermostat is cool indicates a possible fault.
• Inspect the lint screen, exhaust duct, and exterior vent for blockage because restricted airflow can cause overheating and repeated high-limit operation.
• Do not conclude the thermostat is defective from a no-heat symptom alone; also check the heating element or burner circuit, thermal cutoff, wiring, and airflow.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool dryer high-limit thermostat
• Thermostat marking commonly identified as L295-50F or L295-80F in appliance-parts references
• Designed to interrupt power to the heating element or burner during an overheat condition
• Replaces Whirlpool part number 3391914

Installation Notes

• Disconnect electrical power before installation.
• Access and mounting location vary by dryer model; follow the model-specific service or repair instructions.
• Transfer the wires one at a time or label them before removal so each connection returns to the correct terminal.
• Inspect the related wiring and thermal cutoff while the dryer is open, and correct any damaged or overheated connections before reassembly.
• After installation, restore all covers and verify normal heating and airflow operation.

Verified Compatible Models

3CSP2760BN0, 3CSP2760BW0, CE1750XWN0, CE1750XWN1, CE1750XWW0, CE1750XWW1, CE1750XYN0, CE1750XYW0, CEE2760KQ0, CEE2760KQ1, CEE2760KQ2, CEE2790KQ0, CEE2790KQ1, CEE2790KQ2, CEM2750JQ0, CEM2750KQ0, CEM2750KQ1, CEM2750KQ2, CEM2750KQ3, CEM2760JQ0, CEM2760KQ0, CEM2760KQ1, CEM2760KQ2, CEM2760KQ3, CEP2760KQ0, CEP2760KQ1, CEP2760KQ2, CEW2760AN0, CEW2760AN1, CEW2760AW0, CEW2760AW1, CEW2760EW0, CEW2790EW0, CS5000XSW0, CS5000XSW1, CS5000XWN0, CS5000XWW0, CS5005XWW0, CSP2740KQ0, CSP2740KQ1, CSP2740KQ2, CSP2740KQ3, CSP2760AN0, CSP2760AN1, CSP2760AW0, CSP2760AW1, CSP2760EW0, CSP2760HW0, CSP2760KQ0, CSP2760KQ1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.