Whirlpool Range Sealed gas surface burner head assembly, gray, with spark electrode WP3412D024-26, Replaces 12500051, 12500099, 3412D015-14, 3412D016-14, 3412D017-14, 3412D017-26, 3412D018-26, 3412D025-26, 74003965, 7400

Genuine Whirlpool sealed surface burner assembly for gas ranges. The gray burner head includes the spark electrode; the redesigned assembly does not require a gasket seal.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Burner fails to ignite despite sparking
• Flame appears beneath or around the burner head
• Uneven, weak, or irregular flame pattern
• Gas odor associated with a burner that does not ignite normally
• Cracked electrode ceramic or corroded/perforated burner head

Check Before Replacing

• With the appliance cool and the gas supply and electrical power turned off, visually inspect the burner head for cracks, corrosion, perforation, or blocked ports.
• Check that the spark-electrode ceramic is intact and that the electrode connection is secure; do not apply power while inspecting.
• Confirm the burner head is seated and locked correctly in the cooktop and that no gasket or debris is interfering with its seating.
• After cleaning and fully drying the removable burner components according to the appliance manual, compare the flame pattern with another burner; stop use if flames appear below the burner head or if gas odor persists.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool gray sealed surface-burner head assembly
• Spark electrode included
• Redesigned assembly does not require a gasket seal
• Sold individually
• Used on gas ranges and cooktops

Installation Notes

• Allow the appliance to cool completely before service.
• Turn off the range gas supply and disconnect electrical power before removing the burner assembly.
• Remove the grate and rotate the existing burner assembly counterclockwise to release it, following the appliance service instructions.
• Disconnect the spark-electrode wire carefully and prevent the connector from falling into the cooktop.
• Install the replacement with its locating features aligned, reconnect the electrode wire, and rotate clockwise to lock it in place.
• Do not install a separate gasket unless the appliance-specific documentation expressly requires one; the documented redesigned assembly requires no gasket seal.

Verified Compatible Models

24MA-7CKXWV8, 24MN-7CKXWV8, 3115PUV, 3127WTV, 3167VTV, 3167VUV, 3187VRV, 3187VTV, 3187VUV, 31203PAV, 31213WAV, 31315VAV, 31315VBV, 31315WAV, 32315VAV

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.