Whirlpool Refrigerator hinge shim / hinge washer WP489467, Replaces 489467, 489341, Fixes Door does not close properly or is misaligned due to a worn, cracked, or missing hinge shim
Genuine Whirlpool OEM hinge shim/washer used to support and align a refrigerator door hinge assembly. The part is also documented for selected freezer applications.
Genuine Whirlpool OEM hinge shim/washer used to support and align a refrigerator door hinge assembly. The part is also documented for selected freezer applications.
Is This the Right Part?
Common Symptoms
- Refrigerator or freezer door sags or sits out of alignment
- Door does not close smoothly or fails to close properly
- Door may not seal evenly when the hinge shim is worn, cracked, or missing
Check Before Replacing
- With the appliance door closed, visually check whether the door is sagging or uneven relative to the cabinet.
- Inspect the accessible hinge-shim area for a cracked, worn, deformed, or missing plastic washer.
- With the door supported and without forcing the hinge, check for excessive hinge movement or visible clearance at the shim location.
- Confirm that the hinge pin and shim arrangement match the appliance’s model-specific service or owner documentation before ordering or installing a part.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM hinge shim/washer
- Small plastic bearing-and-spacer component for a refrigerator or freezer door hinge
- Helps support the hinge pin, lift the door when needed, and maintain smooth door operation
- Approximately 3/4 inch in diameter according to an established appliance-parts distributor
- Some applications may require two or more washers per door
Installation Notes
- Disconnect electrical power before beginning the repair.
- Support the appliance door before removing or loosening hinge components so the door cannot fall or shift unexpectedly.
- Door removal and hinge disassembly may be required; follow the appliance model’s service or owner instructions for the correct sequence.
- Install the shim in the same hinge location and orientation as the removed part, and do not add or omit washers unless the model documentation specifies it.
- After reassembly, verify that the door is aligned, moves smoothly, and closes properly without forcing it.
Verified Compatible Models
10632242101, 10632243101, 10632249101, 10632842010, 10632852010, 10632852011, 10632853010, 10632853011, 10632862010, 10632862011, 10632863010, 10632863011, 10632872010, 10632873010, 10632882010
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
